STUDY IN PROGRESS OF INTERFACIALLY ENHANCEMENT OF PBO/EPOXY RESIN COMPOSITE

Abstract

Abstract: This article reviews the study of interfacially enhancement of PBO/epoxy composite based on increasing the compatibility between PBO fiber and eposy resin. We analyzed the advantages and shortcomings of mentioned modification methods classfied by designing high energy surface or introducing plenty of chemical active spots. Finally, we did an outlook of this research direction.

Key words: PBO fiber, epoxy resin, surface modification, interfacially enhancement

CLC Number:

TB332

ZHANG Zhen, WANG Bin, LV Jun-wei, LI Hui. STUDY IN PROGRESS OF INTERFACIALLY ENHANCEMENT OF PBO/EPOXY RESIN COMPOSITE[J]. Fiber Reinforced Plastics/Composites, 2018, 0(11): 104-108.

References

[1] 王斌, 金志浩, 丘哲明, 等. PBO纤维的基本性能实验研究[J]. 西安交通大学学报, 2001, 35(11): 1189-1192.
[2] 李霞, 黄玉东, 矫灵艳. PBO纤维的合成及其微观结构[J]. 高分子通报, 2004(4): 102-107.
[3] 江建明, 李光, 金俊弘, 等. 超高性能PBO纤维的最新研究进展[J]. 合成纤维, 2008, 37(1): 5-9.
[4] 范永忠, 孙康. 环氧树脂基复合材料的阻尼性能及在降噪上的应用研究[J]. 材料工程, 2000(3): 29-31.
[5] 崔益华, 陶杰, 徐勇, 等. 无机纳米粒子/环氧树脂基复合材料的研究现状[J]. 宇航材料工艺, 2003, 33(4): 10-15.
[6] 孟庆森, 刘俊玲, 赵利平, 等. 环氧树脂基复合材料抗冲蚀磨损特性研究[J]. 材料科学与工艺, 1999(2): 82-86.
[7] 王斌, 金志浩, 丘哲明, 等. 电晕处理对高性能PBO纤维的表面性能及其界面粘接性能的影响[J]. 复合材料学报, 2003, 20(4): 101-106.
[8] 金俊弘, 罗开清, 江建明, 等. 离子基团对PBO纤维的表面性能及其界面粘结性能的影响[J]. 复合材料学报, 2006, 23(6): 69-74.
[9] Zhang C, Li C, Wang B, et al. Effects of atmospheric air plasma treatment on interfacial properties of PBO fiber reinforced composites[J]. Applied Surface Science, 2013, 276(5): 190-197.
[10] Song B, Meng L H, Huang Y D. Influence of plasma treatment time on plasma induced vapor phase grafting modification of PBO fiber surface[J]. Applied Surface Science, 2012, 258(14): 5505-5510.
[11] Ma Q, Wang B, Lv J, et al. A facile method modified PBO fibers by polysiloxanemicrotube[J]. Materials Letters, 2017, 202: 52-54.
[12] Zhang C H, Huang Y D, Zhao Y D. Surface analysis of γ-ray irradiation modified PBO fiber[J]. Materials Chemistry & Physics, 2005, 92(1): 245-250.
[13] Zhang C H, Zhang C, Zhang Q, et al. Synergy modification of the microstructure and the property of PBO fiber by γ-ray radiation[J]. Polymer Engineering & Science, 2017.
[14] Zhang C H, Xu H, Jiang Z, et al. Carbon nanotubes grafting PBO fiber: A study on the interfacial properties of epoxy composites[J]. Polymer Composites, 2012, 33(6): 927-932 .
[15] Luo L, Hong D, Zhang L, et al. Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism[J]. Composites Science & Technology, 2018.
[16] 邱汉亮, 钱军, 樊黎虹, 等. 甲基磺酸对PBO纤维的表面改性[J]. 功能高分子学报, 2009, 22(2): 165-172.
[17] Farmer B L, Dudis D S, Adams W W. Calculation of the effects of protonation on rigid-rod polymers[J]. Polymer, 1994, 35(17): 3745-3751.
[18] 罗果, 王宜, 胡健, 等. 多聚磷酸改性PBO纤维的研究[J]. 合成纤维工业, 2004, 27(6): 28-30.
[19] 王斌, 丘哲明. 偶联剂对PBO纤维/树脂界面粘接性能的影响[J]. 西安交通大学学报, 2002, 36(9): 975-978.
[20] Liu R, Han Z, Li W, et al. Improvement of the interfacial shear strength of poly(p-phenylenebenzobisoxazole) fiber/epoxy resin composite via a novel surface coating agent[J]. Polymer Composites, 2016, 37(4): 1198-1205.
[21] Song B, Meng L, Huang Y. Surface modification of PBO fiber through oxygen plasma induced vapor phase grafting of acrylic acid[J]. Materials Letters, 2012, 83(23): 118-120.
[22] Chen L, Wei F, Liu L, et al. Grafting of silane and graphene oxide onto PBO fibers: Multifunctional interphase for fiber/polymer matrix composites with simultaneously improved interfacial and atomic oxygen resistant properties[J]. Composites Science & Technology, 2015, 106: 32-38.
[23] Li Y W, Zhao F, Song Y J, et al. Interfacial microstructure and properties of poly (phenylenebenzobisoxazole) fiber grafted with graphene oxide via solvothermal method[J]. Applied Surface Science, 2013, 266(2): 306-312.
[24] Lv J W, Wang B, Ma Q, et al. Interfacially enhancement of PBO/epoxy composites by grafting MWCNTs onto PBO surface through melamine as molecular bridge[J]. Materials Research Express, 2018(5): 065006.
[25] Chen L, Hu Z, Zhao F, et al. Enhanced interfacial properties of PBO fiber via electroless nickel plating[J]. Surface & Coatings Technology, 2013, 235(22): 669-675.
[26] Chen L, Du Y, Huang Y, et al. Facile fabrication of hierarchically structured PBO-Ni(OH)₂ /NiOOH fibers for enhancing interfacial strength in PBO fiber/epoxy resin composites[J]. Composites Science & Technology, 2016, 129: 86-92.
[27] Chen L, Hu Z, Wu Z, et al. POSS-bound ZnO nanowires as interphase for enhancing interfacial strength and hydrothermal aging resistance of PBO fiber/epoxy resin composites[J]. Composites Part A Applied Science & Manufacturing, 2017, 96: 1-8.
[28] Jiang B, Zhang K Y, Zhang T, et al. Investigation of reactivity and biocompatibility poly-p-phenylenebenzobisoxazole fiber grafted hy-perbranchedpolysiloxane[J]. Composites Part B Engineering, 2017,
121.
[29] 朱慧君. 改性聚对苯撑苯并二噁唑纤维的制备、结构与性能研究[D]. 上海: 东华大学, 2008.
[30] 李楠. 石墨烯/PBO复合共聚膜的制备及性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2014.