CURRENT STATUS ON DRILLING TECHNOLOGY OF FIBER REINFORCED COMPOSITES

Abstract

Abstract: Due to its characteristics of mechanical anisotropy, poor thermal conductivity ability, drilling defects such as delaminations, tear and other defects are produced during the drilling process of fiber reinforced composites. This paper reviews the effects such as drilling thrust, drilling parameters and tool geometry on drilling defects of fiber reinforced composites. Furthermore, the current status of drilling technology is analyzed. Finally, reasonable technology parameters, tool geometry and new drilling technology which are important to improve the quality of drilling technology is proposed.

Key words: fiber reinforced composites, drilling defects, drilling technology

CLC Number:

TB332

SUN Qiao-ru, LIU Xiao-dong, WANG Tian-chen, YAO Wen-hao. CURRENT STATUS ON DRILLING TECHNOLOGY OF FIBER REINFORCED COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2017, 0(9): 101-105.

References

[1] 沈观林, 胡更开. 复合材料力学[M]. 北京: 清华大学出版社, 2006: 72-82.
[2] 苏云洪, 刘秀娟, 杨永志. 复合材料在航空航天中的应用[J]. 工程与试验, 2008(4): 36-38.
[3] 陈绍杰. 浅谈空客A380的复合材料应用[J]. 高科技纤维与应用, 2008, 33(04): 1-4.
[4] 王恩青, 张斌. 复合材料在航空航天中的发展现状和未来展望[J]. 科技信息, 2011(33): 290.
[5] F22 战斗机专辑[J]. 航空周刊, 1997, 43.
[6] Won M S, Dharan C. Chisel Edge and Pilot Hole Effects in Drilling Composite Laminates[J].Journal of Manufacturing Science &Engineering, 2002, 124(2): 242-247.
[7] Tsao C C, Hocheng H. The effect of chisel length and associated pilot hole on delamination when drilling composite materials[J]. International Journal of Machine Tools and Manufacture, 2003, 43(11): 1087-1092.
[8] Chen W. Some experimental investigations in the drilling of carbon fiber-reinforced plastic(CFRP) composite laminates[J].International Journal of Machine Tools and Manufacture, 1997, 37(8): 1097-1108.
[9] 张厚江, 陈五一, 陈鼎昌. 碳纤维复合材料钻孔出口椭圆形分层缺陷的研究[J]. 机械工程学报, 2004(12): 145-149.
[10] 王明海, 孙国强. 刀具横刃对复合材料制孔影响的仿真研究[J]. 机械设计与制造, 2013(6): 237-239, 243.
[11] 张厚江, 陈五一, 陈鼎昌. 碳纤维复合材料(CFRP)钻孔出口缺陷的研究[J]. 机械工程学报, 2004, 40(07): 150-155.
[12] Jain S, Yang D C H. Effects of feed rate and chisel edge on delami-nation in composites drilling[J]. Engng Indus, 1993, 115: 398-405.
[13] Won M S, Dharan C H K. Chisel Edge and Pilot Hole Effects in Drilling Composite Laminates[J]. Journal of Manufacturing Science and Engineering, 2002, 124: 242-247.
[14] 李桂玉. 层叠复合材料钻削加工缺陷产生机理及工艺参数优化[D]. 山东: 山东大学, 2011.
[15] 温泉. C_E复合材料制孔损伤形成机理与评价方法研究[D]. 大连: 大连理工大学, 2014.
[16] 张厚江. 碳纤维复合材料的钻削加工[J]. 新技术新工艺, 1998(5): 16-18.
[17] 张厚江. 碳纤维复合材料(CFRP)钻削加工技术的研究[D]. 北京: 北京航空航天大学, 1998.
[18] Chandrasekharan V, Kapoor S G, Devor R E. A Mechanistic Ap-proach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials[J]. Journal of Engineering for Industry, 117(4): 559-570.
[19] Ho-Cheng H, Dharan C K H. Delamination During Drilling in Composite Laminates[J]. Journal of Engineering for Industey, 1990, 112(3): 236-239.
[20] Luo B, Li Y, Zhang K, et al. Effect of workpiece stiffness on thrust force and delamination in drilling thin composite laminations[J]. Journal of Composite Materials, 2016, 50(5): 617-625.
[21] Su F, Wang Z, Yuan J, et al. Study of thrust forces and delamination in drilling carbon-reinforced plastics (CFRPs) using a tapered drilling-reamer[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8): 1457-1469.
[22] 张厚江, 樊锐, 陈五一, 等. 高速钻削碳纤维复合材料钻削力的研究[J]. 航空制造技术, 2006, 12: 76-79, 82.
[23] Guo D M, Wen Q, Gao H, et al. Prediction of the Cutting Forces Generated in the Drilling of Carbon Fiber-Reinforced Plastic Composites Using a Twist Drill[J]. Proceeding of the Institution of Mechanical Engineers, 2011, 226(1): 28-42.
[24] 李桂玉, 李剑峰. 硬质合金钻头钻削碳纤维复合材料工艺[J]. 粉末冶金材料科学与工程, 2010(12): 580-585.
[25] Hocheng H, Puw H, Yao K C. Machining Composite Materials Symposium[J]. ASM Materials Week, 1992: 127-138.
[26] Krishnaraj V, Prabukarthi A, Ramanathan A, et al. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates[J]. Composites Part B: Engineering , 2012, 43(4): 1791-1799.
[27] 刘峰. 碳纤维树脂基复合材料钻、铣加工技术研究[D]. 北京: 北京航空航天大学, 2015.
[28] 张厚江, 陈五一, 陈鼎昌. 碳纤维复合材料钻削孔分层缺陷的研究[J]. 中国机械工程, 2003, 14(22): 1978-1980.
[29] V. N. Gaitonde, S. R. Karnik, J. Campos, et al. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites[J]. Journal of materials processing technology, 2008, 203: 431-438.
[30] S. R. Karnik, V. N. Gaitonde, J. Campos, et al. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model[J]. Materials and Design, 2008, 29: 1768-1776.
[31] J. R.Ferreira, N. L. Coppini, F. Levy Neto. Characteristics of carbon-carbon composite turning[J]. Journal of Materials Processing Technology, 2001, 109(1-2): 65-71.
[32] 魏良耀. 碳纤维复合材料钻削轴向力及刀具磨损的试验研究[D]. 南京: 南京理工大学, 2013.
[33] Mathew J, Ramakrishnan N, Naik N K. Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites[J]. Mater. Process. Technol, 1999, 91(1): 1-11.
[34] C.C.Tsao, Y.C.Chiu. Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills[J]. International Journal of Machine Tool & Manufacture, 2011, 51: 740-744.
[35] C.C.Tsao, H. Hocheng. Effect of tool wear on delamination in drilling composite materials[J]. International Journal of Mechanical Sciences, 2007, 49: 983-988.
[36] Piquet R, Ferret F, Lachaud F, et al. Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills[J]. Compos. Part A: Application Science Manufacture, 2000, 31(10): 107-115.
[37] 李凤全. 碳纤维复合材料制孔缺陷及对策的试验研究[D]. 大连: 大连理工大学, 2008.
[38] 陈明, 邱坤贤, 秦声, 等. 高强度碳纤维增强复合材料层合板的钻削制孔过程及其缺陷形成分析[J]. 南京航空航天大学学报, 2014, 46(5): 667-672.
[39] 刘刚, 张恒, 王亚飞, 等. 碳纤维增强复合材料螺旋铣孔切削力及加工质量研究[J]. 复合材料学报, 2014(05): 1292-1299.
[40] 朱春燕, 蒋红宇, 张烘洲. 飞机装配铣削制孔和钻孔技术对比分析[J]. 南京航空航天大学学报, 2012, 44(1): 37-41.
[41] 王奔, 高航, 毕铭智, 等. C/E复合材料螺旋铣削制孔方法抑制缺陷产生的机理[J]. 机械工程学报, 2012(15): 173-181.
[42] Denkena B, Boehnke D, Dege JH. Helical Milling of CFRP-titanium Layer Compounds[J]. CIRP Journal of Manufacturing Science and Technology, 2008, 1(2): 64-69.