COMPARATIVE STUDY ON JOINING COMPOSITE AND ALUMINUM ALLOY WITH ROLLING RIVETING AND BOLTING

Abstract

Abstract: The connection experiments and static tensile tests of composite and aluminum alloy were carried out by the rolling riveting and the bolt connection. The effects of washer and bonding on the joint strength and the energy absorption were compared. The experiment results show that the peak loads of the two joints are almost the same, but the failure displacement of the bolt joint is longer than that of the rolling riveting joint when the washer exists. Furthermore, the energy absorption value of bolt joint is 16.29% higher than that of the rolling riveting joint, and it has a stronger capacity to absorb vibration. The factor of bonding has little effect on the tensile strength of the two joints. In addition, the peak load of bolt connection is slightly higher than that of the roller riveting connection, and the failure displacement and energy absorption of the two joints are basically the same.

Key words: composite, aluminum alloy, rolling riveting, bolt connection, bonding

CLC Number:

TB332

HUANG Zhi-chao, HE Jun-hua, FENG Jia. COMPARATIVE STUDY ON JOINING COMPOSITE AND ALUMINUM ALLOY WITH ROLLING RIVETING AND BOLTING[J]. Fiber Reinforced Plastics/Composites, 2017, 0(9): 58-62.

References

[1] 黄志超, 陈伟达, 程雯玉, 等. 复合材料连接技术进展[J]. 华东交通大学学报, 2013, 30(4): 1-6, 29.
[2] 陈绍杰. 先进复合材料在汽车领域的应用[J]. 高科技纤维与应用, 2011, 36(1):11-17, 23.
[3] 蒋凌澜, 陈阳. 树脂基复合材料在航天飞行器气动热防护上的应用研究[J]. 玻璃钢/复合材料, 2014(7): 78-84.
[4] 冯鹏. 复合材料在土木工程中的发展与应用[J]. 玻璃钢/复合材料, 2014(9): 99-104.
[5] 刘静安, 谢水生. 铝合金材料应用与开发[M]. 北京: 冶金工业出版社, 2011.
[6] 曲文卿, 董峰, 齐志刚, 等. 异种材料的连接[J]. 航天制造技术, 2006(3): 44-49.
[7] Sadowski T, Knec M, Golewski P. Experimental investigations and numerical modelling of steel adhesive joints reinforced by rivets[J]. International Journal of Adhesion & Adhesives, 2010, 30(5): 338-346.
[8] 王晓侠, 方超, 张亮, 等. 复合材料层合板螺栓连接强度实验研究[J]. 中国舰船研究, 2011,6(3): 88-93.
[9] 张纪奎, 马志阳, 程小全, 等. 复合材料三钉单搭连接有限元模拟与钉载分布[J].复合材料学报, 2012,29(3): 179-183.
[10] 刘兴科, 李亚智, 刘向东, 等. 金属和复合材料多钉连接钉载分配研究[J]. 航空工程进展, 2011,2(2): 193-198.
[11] 李明明, 严文聪, 王晓洁. 基体性能对芳纶Ⅲ纤维复合材料力学性能的影响[J]. 玻璃钢/复合材料, 2017(3): 76-80.
[12] 沈帆, 王钧, 蔡浩鹏. 不同铺层复合材料螺栓连接的研究[J]. 玻璃钢/复合材料, 2012(1): 39-43.
[13] 伍太宾. 国内外摆动辗压技术的研究和发展[J]. 精密成形工程, 2009, 1(3): 1-6.
[14] 黄志超, 张永超, 彭熙琳, 等. 铝板与复合材料板碾铆连接质量的影响因素[J]. 中国机械工程, 2015, 26(23): 3221-3227.
[15] 王花娟, 杨杰, 刘新东, 等. 复合材料机械连接强度影响因素的研究进展[J]. 材料导报, 2007, 21(f11): 438-440.
[16] Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates: D 5961/D 5961M-08[S].
[17] 纤维增强塑料拉伸性能实验方法: GB/T1447—2005[S].
[18] 刘在阳, 李冬梅, 张振龙, 等. 复合材料制品设计过程中需要考虑的机械加工问题[J]. 纤维复合材料, 2008, 25(4): 16-18.
[19] 黄志超, 冯佳, 张永超. 复合板料摆碾铆接、胶接和混合连接性能研究[J]. 玻璃钢/复合材料, 2017(4): 54-59.