DEVELOPMENT OF INVESTIGATION ON THE MECHANICAL PROPERTIES ANALYSIS OF2D BRAIDED COMPOSITES

Abstract

Abstract: The development of mechanical properties of 2D braided composites is discussed. Researches on structural geometry model, experimental and theoretical studies for mechanical properties were included. In research of mesoscopic structure, the choice of representative volume unit to establish a reasonable simplified geometric model is most widely used. In the study of mechanical properties, we mainly analyze the elastic performance, and the finite element analysis is the primary analysis method. Finally, some problems of the present study are put forward,and an outlook for investigation trends in future is presented.

Key words: 2D braided composites, geometrical model, mechanics properties

CLC Number:

TB332

XIA Yan-mao, QIN Zhi-gang. DEVELOPMENT OF INVESTIGATION ON THE MECHANICAL PROPERTIES ANALYSIS OF2D BRAIDED COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2016, 0(2): 91-94.

References

[1] 赵展, Md. Hasab Ikbal, 李炜. 编织机及编织工艺的发展[J]. 玻璃钢/复合材料, 2014, (10): 90-95.
[2] Byun J H. The analytical characterization of 2 D braided textile composites[J]. Composites Science and Technology, 2000, 60(5): 705-716.
[3] Miravete A, Bielsa J M, Chiminelli A, et al. 3D Mesomechanical Analysis of Three-Axial Braided Composite Materials[J]. Composites Science and Technology, 2006, 66 (15): 2954-2964.
[4] 屈鹏. 二维二轴编织复合材料细观力学分析[D]. 山东: 山东大学, 2009.
[5] J.Aboudi, M.J. Pindera.High-fidelity micromechanical modeling of continuously reinforced elastic multiphase materials undergoing finite deformations[J]. Mathematics and Mechanics of Solids, 2004, 9: 599-628.
[6] 孙志刚, 宋迎东, 高德平. 改进的二维高精度通用单胞模型[J]. 固体力学学报, 2005, 26(2): 235-240.
[7] 高希光. 陶瓷基复合材料损伤耦合的宏细观统一本构模型研究[D]. 南京:南京航空航天大学, 2008:3-6.
[8] 燕瑛. 织物细观结构参数对编织复合材料弹性性能的影响[J]. 航空学报,1997,18(6): 666-669.
[9] 郭辉. 二维编织C/SiC复合材料的力学性能研究[D]. 西安: 西北工业大学, 2003: 15-31.
[10] 李刚. 二维编织C/SiC复合材料力学性能的试验研究[D]. 西安: 西北工业大学, 2007: 15-63.
[11] 孙杰. 编织复合材料结构与材料一体化优化设计[D]. 南京: 南京航空航天大学, 2010: 2-7.
[12] Ishikawa T,Chou T W.Stiffness and strength behavior of woven fabric composites[J].Journal of Material Science,1982,17:3211-3220.
[13] Dadkhah M.S, Flintoff J.G, Kniveton T, et al. Simple models for triaxially braided composites [J]. Composites, 1995, 26:561-577.
[14] Potluri P, Manan A, Francke M, et al. Flexural and Torsional Behaviour of Biaxial and Triaxial Braided Composite Structures[J]. Composite Structures, 2006, 75(1): 377-386.
[15] M. V. Donadon, B. G. Falzon, L. Iannucci, et al. A 3-D micromechanical model for predicting the elastic behaviour of woven laminates[J]. Composites Science and Technology, 2007, 67: 2467-2477.
[16] A. Tabiei, Weitao Yi. Comparative study of predictive methods for woven fabric composite elasticproperties[J].Composites Structures, 2002,58: 149-164.
[17] Hoa S V, Sheng S Z, Ouellette P. Determination of Elastic Properties of Triax Composite Materials[J]. Composites Science and Technology, 2003, 63(3): 437-443.
[18] 燕瑛, 丁逸强. 二维和三维纺织结构复合材料弹性性能的研究[J]. 航空学报, 1996, 17(7):98-102.
[19] 陶永强, 矫桂琼, 等.二维编织陶瓷基复合材料应力-应变行为[J].力学与实践, 2009,31(3):39-44.
[20] 王立朋,燕瑛. 编织复合材料弹性性能的细观分析及试验研究 [J]. 复合材料学报, 2004, 21(4):152-156.
[21] 张芳芳.编织复合材料力学性能及热物理性能预报研究[D].河北:燕山大学, 2014:71-93.
[22] Dmitry S Ivanov, Fabien Baudry,Bjorn Van Den Broucke, et al.Failure analysis of triaxially braided composites[J]. Composites Scienceand Technology, 2009,69: 1372-1380.
[23] Whitcomb J. D.Three-dimensional stress analysis of plain weave composites[A]. Composie Materials: Fatigue and Fracture(Third Volume)[C]. Philadelphia: ASTM STP 1110, TKO′s Brien Ed. American Society for Testing and Materials, 1991. 417-438.
[24] Y C Zhang, J. Harding. A numerical micromechanics analysis of the mechanical properties of plain weave composite[J]. Computers and Structures, 1990, 36: 839-844.
[25] K. H. Tsai, Chung-Li Hwan, Wen-Liang Chen, et al. A parallelogram spring model for predicting the effective elastic properties of 2D braided composites[J]. Composite Structures, 2008, 83: 273-283.
[26] 严雪, 许希武, 张超. 二维三轴编织复合材料的弹性性能分析[J]. 固体力学学报, 2013, 34(2): 140-152.
[27] 许英杰, 张卫红, 汪海滨. 多元多层平纹机织CMC-SiC弹性常数的多尺度均匀化高效预测方法[J]. 材料科学与工程学报, 2008, 26(4): 526-529.
[28] 汪海滨, 张卫红, 杨军刚. 考虑孔隙和微裂纹缺陷的C/C-SiC编织复合材料等效模量计算[J]. 复合材料学报, 2008, 25(3): 182-189.