Synthesis of melamine solid waste modified phenolic resin and its influence on the properties of moulding compounds

doi:10.19936/j.cnki.2096-8000.20240528.003

Abstract

Abstract: The green disposal of solid waste and the resource modification of traditional materials are of great significance to the healthy development of chemical and material industries. In this paper, solid waste OAT(oxiaminothriazine)was used to modify phenolic resin, the feasibility of reactive introducing OAT into phenolic resin was discussed, and the modified resin was used as the matrix to prepare phenolic moulding compounds (PMC). The influence of modified resin on the properties of PMC was studied. The results showed that OAT had a certain reactivity with formaldehyde, and the viscosity of phenolic resin decreased with the introduction of OAT, but with the further increase of the dosage, the viscosity and polymerization speed increased, but the fluidity decreased significantly, the optimal dosage of OAT was about 8%. PMC prepared with OAT modified phenolic resin have better thermal stability and electrical strength, and other properties are comparable to those of ordinary mouldings.

Key words: OAT, melamine, solid waste, phenolic resin, phenolic moulding compounds, composites

CLC Number:

TB332

ZHAI Suyu, HUANG Shijun, CHEN Weiting, ZHANG Zhenwei, LUO Yaosen, LI Chenhui, SU Zhizhong. Synthesis of melamine solid waste modified phenolic resin and its influence on the properties of moulding compounds[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 19-24.

References

[1] PILATO L. Phenolic resins: 100Years and still going strong[J]. Reactive and Functional Polymers, 2013, 73(2): 270-277.
[2] ASIM M, SABA N, JAWAID M, et al. A review on phenolic resin and its composites[J]. Current Analytical Chemistry, 2018, 14(3): 185-197.
[3] TANG K, ZHANG A, GE T, et al. Research progress on modification of phenolic resin[J]. Materials Today Communications, 2021, 26: 101879.
[4] 陈炯材, 蔡铭威, 吴嘉豪, 等. 线性酚醛树脂在集成电路领域的应用与研究进展[J]. 高分子通报, 2023, 36(9): 1174-1181.
[5] MAERTENS R, HEES A, SCHÖTTL L, et al. Fiber shortening during injection molding of glass fiber-reinforced phenolic molding compounds: Fiber length measurement method development and validation[J]. Polymer-Plastics Technology and Materials, 2021, 60(8): 872-185.
[6] 胡立红, 薄采颖, 周静, 等. 木质素改性可发性甲阶酚醛树脂的固化动力学研究[J]. 高分子通报, 2015(12): 98-103.
[7] 蔡诗琦, 孟付良, 石剑, 等. 腰果酚改性酚醛树脂的研究进展[J]. 化工新型材料, 2023, 51(6): 29-33.
[8] 方丽华, 杨惠贤, 苏志忠, 等. 环境友好脲醛树脂胶的制备[J]. 三明学院学报, 2014, 31(6): 70-75.
[9] 全国塑料标准化技术委员会热固性塑料分会. 酚醛模塑料用酚醛树脂: GB/T 30772—2014[S]. 北京: 中国标准出版社, 2014.
[10] 全国塑料标准化技术委员会塑料通用方法和产品分技术委员会. 塑料粉状酚醛模塑料第2部分: 试样制备和性能测定: GB/T 1404.2—2008[S]. 北京: 中国标准出版社, 2008.
[11] 许善锋, 李竞, 罗兴, 等. 核桃壳三聚氰胺改性脲醛树脂的制备及其热降解性能表征[J]. 材料科学与工程学报, 2021, 39(5): 826-31.
[12] 王天坤, 孙洁, 俞科静, 等. 三聚氰胺甲醛树脂改性及泡沫的制备与研究[J]. 化工新型材料, 2015, 43(12): 82-84.
[13] 傅深渊, 程书娜, 马灵飞, 等. 三聚氰胺-苯酚-甲醛共缩聚合成机理及性能研究[J]. 北京林业大学学报, 2008(3): 107-112.
[14] 杨海兵, 潘礼成, 张一甫, 等. 麦芽糖-三聚氰胺-甲醛共缩聚树脂的热性能分析[J]. 桂林理工大学学报, 2015, 35(3): 595-601.
[15] WAN J, WANG S, LI C, et al. Effect of molecular weight and molecular weight distribution on cure reaction of novolac with hexamethylenetetramine and properties of related composites[J]. Thermochimica Acta, 2012, 530: 32-41.
[16] 黄世俊, 翟苏宇, 陈银桂, 等. 腰果壳油改性酚醛树脂的合成及复合材料的性能[J]. 高分子材料科学与工程, 2016, 32(2): 42-48.
[17] HAN C, KIM H, NAM B. A Study of the property effect of phenolic molding compounds by the modified phenol resins[J]. Transactions of Korean Society of Automotive Engineers, 2020, 28(4): 265-270.
[18] SCHEFFLER T, GEHDE M, SPÃTH M, et al. Determination of the flow and curing behavior of highly filled phenolic injection molding compounds by means of spiral mold[J]. AIP Conference Proceedings, 2019, 2055(1): 120007.
[19] 马子强. 酚醛树脂的合成及应用研究进展[J]. 合成树脂及塑料, 2021, 38(6): 71-74.
[20] WANG S, XING X, WANG Y N, et al. Influence of poly (dihydroxybiphenyl borate) on the curing behaviour and thermal pyrolysis mechanism of phenolic resin[J]. Polymer Degradation and Stability, 2017, 144: 378-391.
[21] 易新龙, 冯安妮, 邵文尧, 等. 硼改性酚醛树脂的合成及其模塑料力学性能研究[J]. 材料导报, 2015, 29(16): 52-57.