Design and analysis of surface treatment device for filament wound plastic liner

doi:10.19936/j.cnki.2096-8000.20240228.014

Abstract

Abstract: In order to improve the surface treatment quality and time of plastic liner, save time and labor costs, this paper designs an automatic treatment device for the surface treatment of filament wound plastic liner. It can realize automatic clamping and positioning of plastic liner, surface treatment of plastic liner and other functions. This paper mainly introduces the designed clamping transmission device and plasma surface treatment device and other related structures, and carries out the overall design and assembly of this device in SolidWorks software, checks the strength of some parts in the Workbench, and analyzes the relevant results in the Workbench. The device meets the relevant mechanical requirements and can drive smoothly, meeting the design requirements.

Key words: plastic liner, structural design, Workbench, surface treatment, composites

CLC Number:

TB332

TIAN Huifang, LIU Jiao, WU Yingfeng. Design and analysis of surface treatment device for filament wound plastic liner[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 96-101.

References

[1] 谢霞, 邱冠雄, 姜亚明. 纤维缠绕技术的发展及研究现状[J]. 天津工业大学学报, 2004(6): 19-22.
[2] 陈博. 国内外复合材料工艺设备发展述评之二——纤维缠绕成型[J]. 复合材料科学与工程, 2023(S1): 10-30.
[3] ZHANG X, JIANG L H, MENG Y D. Influence of coupling agent chain lengths on interfacial performances of polyarylacetylene resin and silica glass composites[J]. Applied Surface Science, 2007, 253(9): 4338-4343.
[4] 程永奇, 张鹏, 孙友松, 等. 表面处理对碳纤织物增强环氧树脂复合材料界面及性能的影响[J]. 高分子材料科学与工程, 2015, 31(5): 66-71.
[5] 刘彪, 徐亮, 凌俊, 等. 塑料内胆纤维缠绕气瓶分层脱胶缺陷的红外检测方法探究[J]. 特种设备安全技术, 2020(1): 21-22.
[6] 姚婷. 提高轮胎内表面粘合性能的方法[J]. 轮胎工业, 2019, 39(2): 67-72.
[7] 陶丽. 等离子体诱导接枝碳纳米管及其环氧树脂复合材料的研究[D]. 赣州: 赣南师范学院, 2012.
[8] 田会方, 任政, 吴迎峰, 等. 纤维缠绕罐工装杆旋拧装置设计与分析[J]. 复合材料科学与工程, 2022(6): 105-110.
[9] 蒲锐. 聚脲涂层与聚丙烯基材附着性能改性研究[D]. 青岛: 青岛理工大学, 2019.
[10] 邱志成, 王斌, 韩建达, 等. 无杆气缸驱动的柔性机械臂振动控制[J]. 机器人, 2012, 34(1): 9-16.
[11] 张開. 玻璃纤维缠绕件芯模的优化研究[D]. 太原: 中北大学, 2017.
[12] 褚磊, 徐忠兰. 手持式三爪夹取器的主要结构设计[J]. 内江科技, 2022, 43(9): 64, 93.
[13] 区焕财, 区健彬, 颜宇东. 不同材质瓶盖及夹具的夹持力选用研究[J]. 机电工程术, 2022, 51(9): 263-265.
[14] 朱子宏, 沈志强, 高文硕, 等. 夹具特性对振动控制精度影响效应分析[J]. 环境技术, 2016, 34(5): 14-18, 27.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[6]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[7]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[8]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[9]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[10]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[11]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[12]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[13]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[14]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.
[15]	FENG Xuebin, WANG Bowen, ZHANG Wenwei, DENG Hang, LIU Penghui. Life prediction method of wind turbine blade flapping fatigue test based on CLD model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 70-74.