Structural analysis of fiber winding composite case base on plate and shell theory

doi:10.19936/j.cnki.2096-8000.20211228.031

Abstract

Abstract: Generally, inconsistent radial displacement at the equatorial circle is caused by the calculation of stress field based on the cylindrical shell and Laplace film theory for the cylinder body and the head respectively, and this inconsistency arises the phenomenon of theoretical structural separation which is incompatible with the actual deformation during the overall loading process. Due to the variation of angle, thickness and curvature of the fiber-wound composite shell head, the calculation of stress field is very complicated. Taking the inconsistency of radial displacement and deformation at the equator as starting point, the method of theoretical analysis of complex force field of fiber-wound composite head not only considers the sudden change of the structure curvature at the equatorial circle, but also considers that of the stiffness of material on the structure at the same time. And by making the metal connector end face pressure load to be the equivalent load of contact part of the composite, the radial film displacement under the equivalent load of pole hole is used as the boundary condition of the control equation. Based on the plate and shell theory, this paper discussed the calculation method of the moment stress field of the fiber-wound composite case head, and established a theoretical model of composite rocket case with bending moment, explored the reason why pole hole always swell damage. A standard pressure test of a ø150 dry winding composite case was carried out, the comparison of analytical and numerical solutions show that the method has good approximation accuracy to describe the stress field distribution of the fiber winding composite material layers. According to the theoretical calculation results, reveals internal mechanism from the aspects of structural mutation and material stiffness mutation, as well as the law of shell stress under different winding schemes. This calculation method has the potential to lay a theoretical foundation for a reasonable structural design, which is of great significance to quickly understand the overall strain state of the case at the beginning of design.

Key words: composite materials shell, filament winding, laminate, plate and shell theory, stress analysis of dome

CLC Number:

TB332

ZU Lei, MOU Xing, ZHANG Qian, FAN Wen-jun, WU Shi-jun, WU Qiao-guo, ZHANG Gui-ming, GENG Hong-bo. Structural analysis of fiber winding composite case base on plate and shell theory[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(12): 5-16.

References

[1] 冯雪, 沈俊, 田桂, 等. 复合材料压力容器在航天领域的应用研究[J]. 火箭推进, 2014, 40(4): 35-42.
[2] 王婉君, 张鹏, 贺政豪, 等. 碳纤维复合材料压力容器的研究进展[J]. 现代化工, 2020, 40(1): 68-71.
[3] 陈汝训. 纤维缠绕壳体设计的网格分析方法[J]. 固体火箭技术, 2003, 26(1): 30-32.
[4] 陈汝训. 固体火箭发动机混杂纤维缠绕壳体设计分析[J]. 宇航学报, 2000, 21(4): 129-133.
[5] 李思简, 王熙. 复合材料层合壳体的弹性理论解[J]. 复合材料学报, 1989, 6(4): 10-20.
[6] SAYYAD A S, GHUGAL Y M. Stress analysis of laminated composite and sandwich cylindrical shells using a generalized shell theory[J]. Composite Materials and Engineering, 2020, 2(2): 103.
[7] MUSTHAK M, VALLI P M, RAO S N. Prediction of transverse directional strains and stresses of filament wound composite pressure vessel by using higher order shear deformation theories[J]. International Journal of Composite Materials, 2016, 6: 79-87.
[8] RASHID Y R. Analysis of axisymmetric composite structures by the finite element method[J]. Nuclear Engineering and Design, 1966, 3(1): 163-182.
[9] 洪志泉, 卓曙君, 王祖光. 轴对称载荷作用下迭层复合材料旋转壳体的有限元法[J]. 工学学报, 1979(2): 47-67.
[10] 诺沃日洛夫 B B. 薄壳理论[M]. 北京: 科学出版社, 1959: 114-115.
[11] 李业勤. 旋转薄壳边缘应力存在原因分析[J]. 石油化工设备, 2011, 40(4): 31-34.
[12] CHO S M, KIM K S, LEE S K, et al. Effect of dome curvature on failure mode of type 4 composite pressure vessel[J].International Journal of Precision Engineering and Manufacturing, 2018, 19(3): 405-410.
[13] 桑如苞, 夏少青, 闫东升. 板壳理论在压力容器强度设计中的经典应用之二: 八种压力容器壳体的强度计算方法分析(下)[J]. 石油化工设备技术, 2017, 38(2): 1-7, 9.
[14] 桑如苞, 夏少青, 闫东升. 板壳理论在压力容器强度设计中的经典应用之二: 八种压力容器壳体的强度计算方法分析(上)[J]. 石油化工设备技术, 2017, 38(1): 1-6, 77.
[15] 崔逸琼, 蔡泽伟, 徐永春. 组合壳体结构边缘应力分析[J]. 中国水运(下半月), 2009, 9(12): 179-180, 206.
[16] 车俊铁. 压力容器椭圆形封头与圆柱壳过渡连接处的力学综合分析[J]. 北京石油化工学院学报, 2002, 10(3): 53-56.
[17] 苏亮. 内压容器椭圆封头应力分析[J]. 石油化工设备, 2016, 45(5): 21-24.
[18] PALIWAL D N, KUMAR P, BHAT I K. Discontinuity stresses in orthotropic pressure vessels[J]. International Journal of Pressure Vessels & Piping, 1997, 72(1): 63-72.
[19] 卓震. 化工容器及设备 (第二版)[M]. 北京: 中国石化出版社, 2008: 19-36.
[20] 铁摩辛柯 S, 沃诺斯基 S. 板壳理论[M]. 北京: 科学出版社, 1977: 459-609.
[21] 王耀先. 复合材料力学与结构设计[M]. 上海: 华东理工大学出版社, 2012: 69-114.
[22] 矫维成, 王荣国, 刘文博, 等. 纤维缠绕复合材料压力容器封头厚度预测[J]. 复合材料学报, 2010, 27(5): 116-121.
[23] 文武. 一些特殊类型的变系数二阶线性微分方程解法的研究[J]. 大学数学, 2016, 32(2): 106-113.
[24] 沈观林. 复合材料力学[M]. 北京: 清华大学出版社, 2006: 172-173.
[25] 黄炎, 杨光松. 轴对称载荷作用下叠层复合材料旋转壳的分段解析法[J]. 复合材料学报, 1985(2): 61-68, 93-94.
[26] 陈汝训. 炭纤维壳体封头设计的几个问题[J]. 固体火箭技术, 2009(5): 543-547.
[27] 郭凯特, 王春, 文立华, 等. 不等开口纤维增强树脂复合材料缠绕壳体非测地线线型设计[J]. 复合材料学报, 2019, 36(5): 1189-1199.
[28] 曹金凤, 王旭春. Python语言在Abaqus中的应用[M]. 北京: 机械工业出版社, 2011: 1-200.
[29] 庄茁. 基于ABAQUS的有限元分析和应用[M]. 北京: 清华大学出版社, 2009: 3-110.
[30] 齐威. ABAQUS 6.14超级学习手册[M]. 北京: 人民邮电出版社, 2016: 1-256.