Study on penetration resistance of ceramic/UHMWPE composite target plates with different shapes

doi:10.19936/j.cnki.2096-8000.20221128.007

Abstract

Abstract: A kind of special-shaped composite target plate composed of SiC ceramic and UHMWPE plate is presented. Finite element software ANSYS/LS-DYNA is used to conduct numerical simulation to explore the anti-penetration performance of the target plate under the 53 type 7.62 mm armor-piercing firebomb, and the numerical simulation was verified experimentally. Furthermore, the shape and the bending radian of the target plate on the penetration resistance are further studied. The results show that the anti-penetration performance of the outer convex spherical shell target is the best, and that of the concave spherical shell is the worst. Convex curved target plate is better than concave curved target plate. The bending of the target plate increases the peak load of the ceramic panel. With the increase of the bending radian of the target plate, the residual velocity of the bullet decreases at first and then increases, and the energy absorption of the target plate increases at first and then decreases. When the central angle of the convex curved target plate is 8°, the anti-penetration performance is the best. The peak load of the ceramic panel varies greatly with the change of the bending radian of the target plate, while the peak load of the UHMWPE backplane changes little.

Key words: special-shaped composite target plate, numerical simulation, bending radian, anti-penetration performance

CLC Number:

TB332

HUANG Hao-jie, LIANG Sen, ZHOU Yue-song. Study on penetration resistance of ceramic/UHMWPE composite target plates with different shapes[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(11): 49-53.

References

[1] 曹凌宇, 罗兴柏, 刘国庆, 等. 军用装甲防护技术发展及应用[J]. 包装工程, 2018, 39(3): 223-228.
[2] 张林, 陈斌, 谭清华, 等. 陶瓷复合装甲抗14.5 mm穿燃弹侵彻的抗弹性能[J/OL]. 兵工学报, 1-9[2021-12-02].http://kns.cnki.net/kcms/detail/11.2176.TJ.20210929.1617.002.html.
[3] 魏化震, 钟蔚华, 于广. 高分子复合材料在装甲防护领域的研究与应用进展[J]. 材料工程, 2020, 48(8): 25-32.
[4] 范群波, 李鹏茹, 周豫, 等. 圆筒型陶瓷-钛合金-芳纶三单元层复合靶板结构抗弹性能数值模拟及其内在机理[J]. 北京理工大学学报, 2020, 40(2): 219-226.
[5] 石益建, 杜忠华, 高光发, 等. 异形B₄C/Al复合靶板抗侵彻数值模拟分析[J]. 弹箭与制导学报, 2020, 40(2): 67-71.
[6] 巩玉贤. 大尺寸异形Al₂O₃防弹装甲制备技术的研究[D]. 山东: 山东理工大学, 2009.
[7] KRISHNANA K, SOCKALINGAMA S, BANSAL S, et al. Numerical simulation of ceramic composite armor subjected to ballistic impact[J]. Composites Part B: Engineering, 2010, 41(8): 583-593.
[8] 徐国军, 张俊, 郑兴伟, 等. 金属蜂窝增强陶瓷复合装甲抗侵彻性能研究[J]. 弹箭与制导学报, 2019, 39(2): 92-96.
[9] 孙启添, 田超, 孙昕, 等. 封装陶瓷形状对复合结构抗侵彻性能的影响[J]. 兵工学报, 2020, 41(s2): 83-88.
[10] 李伟, 李晶, 叶勇. UHMWPE纤维层合板防弹性能数值分析研究[J]. 兵器材料科学与工程, 2012, 35(4): 84-87.
[11] 王东哲, 秦溶蔓, 孙娜, 等. 陶瓷/纤维复合装甲抗弹丸侵彻性能的试验与数值模拟研究[J]. 材料导报, 2021, 35(18): 18216-18221.
[12] 黄晓明, 方志威, 侯海量, 等. 陶瓷/钢复合装甲抗高速破片侵彻性能数值模拟[J]. 舰船科学技术, 2019, 41(5): 34-38.
[13] SWOLFS Y, GEBOES Y, GORBATIKH L, et al. The importance of translaminar fracture toughness for the penetration impact behaviour of woven carbon/glass hybrid composites[J]. Composites Part A: Applied Science and Manufacturing, 2017, 103: 1-8.
[14] 邹有纯, 熊超, 殷军辉, 等. 层状复合结构侵彻性能试验与数值模拟[J/OL]. 复合材料学报, 1-14[2021-12-02]. https://doi.org/10.13801/j.cnki.fhclxb.20210604.002.
[15] 胡年明, 陈长海, 朱锡, 等. 陶瓷与芳纶层合板叠层结构抗侵彻性能试验研究[J]. 兵工学报, 2018, 39(5): 976-982.
[16] GAMA B A, GILLESPIE J W. Finite element modeling of impact, damage evolution and penetration of thick-section composites[J]. International Journal of Impact Engineering, 2011, 38(4): 181-197.
[17] 周庆, 何业茂, 刘婷. 层间混杂复合材料装甲板防弹性能及其防弹机制[J]. 复合材料学报, 2019, 36(4): 837-847.
[18] HU D, ZHANG Y, SHEN Z W, et al. Investigation on the ballistic behavior of mosaic SiC/UHMWPE composite armor systems[J]. Ceramics International, 2017, 43(13): 10368-10376.