Design and analysis of glass fiber group knotting device in winding process of water treatment tank

doi:10.19936/j.cnki.2096-8000.20220728.014

COMPOSITES SCIENCE AND ENGINEERING ›› 2022, Vol. 0 ›› Issue (7): 93-98.DOI: 10.19936/j.cnki.2096-8000.20220728.014

• APPLICATION RESEARCH • Previous Articles Next Articles

Design and analysis of glass fiber group knotting device in winding process of water treatment tank

TIAN Hui-fang, ZHANG Guo-wu^*, WU Ying-feng, REN Zheng

College of Mechanical and Electrical Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2021-08-16 Published:2022-08-23

Abstract

Abstract: Currently, the winding of glass fiber bundle continuation is using manual knotting. This paper studied the working principle of existing knotting equipment, and designed a knotting device for glass fiber group continuation. In Creo software, the knotting device was designed in detail, and the fiber bundle continuation function of the knotting device was verified by simulation.

Key words: glass fiber, fiber bundle knot, timing design, Creo, composites

CLC Number:

TB332

TIAN Hui-fang, ZHANG Guo-wu, WU Ying-feng, REN Zheng. Design and analysis of glass fiber group knotting device in winding process of water treatment tank[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(7): 93-98.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[6]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[7]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[8]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[9]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[10]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[11]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[12]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[13]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[14]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.
[15]	FENG Xuebin, WANG Bowen, ZHANG Wenwei, DENG Hang, LIU Penghui. Life prediction method of wind turbine blade flapping fatigue test based on CLD model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 70-74.

Design and analysis of glass fiber group knotting device in winding process of water treatment tank

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments