Design and analysis of screw device for fiber winding tank tooling rod

doi:10.19936/j.cnki.2096-8000.20220628.016

Abstract

Abstract: In this paper, a screw device is designed for automatic handling and automatic loading and unloading of the tooling rod of the fiber winding tank. It can mainly realize the working requirements of handling tooling rod and core mold, holding core mold, loading and unloading tooling rod and installing core mold bottom support. This paper mainly introduces the design of tooling rod structure, clamping screw device and manipulator end-effector structure, and the fiber winding tank tooling rod screw device in SolidWorks software for the overall design and assembly, the size of the clamping force and vacuum sucker suction, of which the results meet the requirements of the work. In the Ansys Workbench software, the clamping device and tooling rod were simulated and analyzed respectively in the working state to verify the rationality of the design.

Key words: tooling rod, screw, clamping, finite element analysis, composites

CLC Number:

TB332

TIAN Hui-fang, REN Zheng, WU Ying-feng, ZHANG Guo-wu. Design and analysis of screw device for fiber winding tank tooling rod[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(6): 105-110.

References

[1] 肖艳. 复合材料的发展历程及其应用[J]. 建筑, 2009(24): 59-60.
[2] 陈杨如, 张适阔. 复合材料成型工艺[M]. 武汉: 武汉理工大学出版社, 2012.
[3] 邓文波, 习小斌, 冯万喜. 复合材料主要应用领域现状与发展趋势[J]. 黑龙江科技信息, 2017(7): 84.
[4] YANG Y Q, ZHAO D F, XU J, et al. Mechanical and optical properties of silk fabric/glass fiber mat composites: An artistic application of composites[J]. Textile Research Journal, 2018, 88(8): 932-945.
[5] 何亚飞, 矫维成, 杨帆, 等. 树脂基复合材料成型工艺的发展[J]. 纤维复合材料, 2011, 28(2): 7-13.
[6] 黄家康. 复合材料成型技术及应用[M]. 北京: 化学工业出版社, 2011.
[7] 蔡金刚, 于柏峰, 杨志忠, 等. 我国纤维缠绕技术及产业发展历程与现状[J]. 玻璃钢/复合材料, 2014(9): 42-51.
[8] 田会方, 张阳, 吴迎峰, 等. 纤维缠绕自动挑剪/挂纱机构剪切实验研究[J]. 复合材料科学与工程, 2020, 4(11): 76-80.
[9] 邱志成, 王斌, 韩建达, 等. 无杆气缸驱动的柔性机械臂振动控制[J]. 机器人, 2012, 34(1): 9-16.
[10] 张開. 玻璃纤维缠绕件芯模的优化研究[D]. 太原: 中北大学, 2017.
[11] 邓琦, 徐金文, 高新华, 等. 舰船甲板防滑涂料技术现状及发展趋势[J]. 中国舰船研究, 2013, 8(2): 111-116.
[12] 孙雪. 吸盘式挖泥船吸盘特性研究[D]. 哈尔滨: 哈尔滨工程大学, 2012.
[13] QIAN Z Y, ZHAO Y Z, FU Z, et al. Design and realization of a non-actuated glass-curtain wall-cleaning robot prototype with dual suction cups[J]. International Journal of Advanced Manufacturing Technology, 2006, 30(1-2): 147-155.
[14] 姚璐璐. 陆地钻机立柱式钻杆排放系统设计[D]. 兰州: 兰州理工大学, 2012.
[15] 丛海鹰, 毛承志, 刘北英. 吸盘式上下板料机械手关键结构设计[J]. 机械制造与自动化, 2008(3): 76-78.
[16] 高颖超, 王好臣, 孙茉婧, 等. 瓷板码垛机器人吸盘手爪的设计分析[J]. 机械工程与自动化, 2017, 4(6): 79-80, 85.