DISCUSSION ON THE APPLICATION OF FMEA IN THE DESIGN AND DEVELOPMENT OF COMPOSITE MATERIALS

Abstract

Abstract: In the early stages of product formation, it was important to identify potential failure causes and take preventive measures for the development of composite products, especially for engine parts and other high-tech products. This paper introduced the application of FMEA technology in the composite engine component design and development. Through the analysis of potential causes of failure, it found that the design of oil pan external ribs was the main factors affecting the product whether withstand the flying rocks impact to avoid product leakage. Through the stone impact test, it verified the reliability of the external structure design and effectively reduced the risk of product development.

Key words: FMEA, composite, design and development

CLC Number:

TB332

DU Zhi-hua, XIONG Hong-mei, YANG De-xu, CUI Qiao-li. DISCUSSION ON THE APPLICATION OF FMEA IN THE DESIGN AND DEVELOPMENT OF COMPOSITE MATERIALS[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(6): 64-66.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[4]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[5]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	FENG Zhenhui, WANG Zhe, ZENG Jie, CHEN Binbin, FENG Chunle, ZHOU Fan. A method for optical fiber impact localization and load history reconstruction of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 52-56.
[8]	ZHANG Dewei, WEI Wei, ZHANG Pin, WANG Qi, ZHAO Cong, AN Luling. Shape control of aircraft composite components based on measured data [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 57-66.
[9]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[10]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[11]	CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.
[12]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[13]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.
[14]	XU Lin, LIU Chuanjun, ZHAO Chongshu. Application and development trends of composite materials in civil aircraft [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 98-104.
[15]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.

DISCUSSION ON THE APPLICATION OF FMEA IN THE DESIGN AND DEVELOPMENT OF COMPOSITE MATERIALS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments