Research on process of T300 carbon fiber/BMP370 polyimide composites and its properties

doi:10.19936/j.cnki.2096-8000.20211228.015

Abstract

Abstract: The BMP370 polyimide of high-temperature resistant PMR-15 model is a new third-generation polyimide resin. The composites curing process of the BMP370 and the T300 carbon fiber includes the amidation, the imidization and the cure cross-linking reaction. The volatiles content and the vacuum control during the curing is studied particularly. The mechanical, high-temperature mechanical and physical properties of laminates are analyzed. The development direction used in model application was proposed.

Key words: composites, polyimide, high-temperature mechanical properties, curing

CLC Number:

TB332

LIANG Heng-liang, ZHOU Hong-fei, SUN Ke-han. Research on process of T300 carbon fiber/BMP370 polyimide composites and its properties[J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(12): 95-98.

References

[1] 陈祥宝, 傅英, 沈超, 等. LP-15聚酰亚胺复合材料研究[J]. 复合材料学报, 1998, 15(1): 7-12.
[2] 吕通健, 何天白, 等. 高韧性PMR 聚酰亚胺复合材料树脂基体的研究[J]. 高分子材料科学与工程, 1996, 21(1): 139-142.
[3] 贾丽霞. 碳纤维/聚酰亚胺耐高温复合材料成型工艺及其性能的研究[J]. 纤维复合材料, 1996(2): 25-32.
[4] 高峰, 李勇. M46J/BMP-316复合材料的成型工艺及其性能[J]. 纤维复合材料, 2005(4): 3-6.
[5] 王晓春, 高生强. 耐高温聚酰亚胺复合材料[J]. 绝缘材料, 2001(4): 16-19.
[6] 杨士勇, 范琳. 耐高温聚酰亚胺材料研究进展[J]. 高分子通报, 2011(10): 70-78.
[7] 曲希明, 冀棉. 耐371 ℃ PMR型含异构联苯结构的聚酰亚胺树脂及复合材料[J]. 宇航材料工艺, 2009, 26(3): 50-53.
[8] 陈建升, 左红军. 苯乙炔基封端PMR型聚酰亚胺树脂的制备与性能研究[J]. 航空材料学报, 2007, 27(5): 66-70.
[9] GRAY R A, MCGRATH L R. The development of high-temperature polyimides for resin transfer molding[J]. SAMPE Journal, 2004, 40(6): 23-31.
[10] 赵伟栋, 蒋文革. 新型耐370 ℃聚酰亚胺复合材料固化工艺与性能研究[J]. 材料科学与工艺, 2011, 19(5): 125-130.
[11] 王震, 杨慧利, 盖小苏, 等. 苯炔基封端的联苯型聚酰亚胺复合材料[J]. 复合材料学报, 2006, 23(3): 1-4.
[12] 李永真, 陈玉红, 王贵珍, 等. 共聚联苯聚酰亚胺的模压工艺研究[J]. 绝缘材料, 2011, 44(3): 57-59.
[13] 阎敬灵, 孟祥胜, 王震, 等. 热固性聚酰亚胺树脂研究进展[J]. 应用化学, 2015, 32(5): 489-497.
[14] 徐雪英. 石墨/聚酰亚胺成型工艺[J]. 导弹与航天运载技术, 1983(5): 87-98.
[15] 邹胜欧. 聚酰亚胺发展动向[J]. 化工新型材料, 1999, 27(3): 3-6.
[16] 李生柱. 聚酰亚胺的现状与将来[J]. 化工新型材料, 1999, 27(11): 12-17.