[1] C D拉德, A C朗,K N肯德尔,等. 复合材料液体模塑成型技术[M]. 北京:化学工业出版社,2004.
[2] 张彦飞,刘亚青, 杜瑞奎, 代建学,等. 复合材料液体模塑成型技术(LCM)的研究进展[J]. 塑料,2005,2(34).
[3] 黄发荣,周燕,等,先进树脂基复合材料[M]. 北京: 化学工业出版社,2008.
[4] 康永,罗红,等. RTM加工工艺存在的问题及研究现状[J]. 中国粉体工业,2012.
[5] 李彩球,刘晓慧,等. RTM制品常见缺陷及其对策[J]. 玻璃钢/复合材料,2002,(5):41-42.
[6] 张林文,胡幼奕. RTM成型技术再认识[J]. 玻璃钢/复合材料,1998, (5): 7-8.
[7] 刘德安,马烨,沈国木.RTM模具的材料与加固[J].玻璃钢/复合材料,1999, (4): 24-26.
[8] Hasko G,Dexter H B,Loos S. Application of science-based RTM for fabricating primary aircraft structural elements[J]. J Adv Mater,1994, (2):9.
[9] 李婧,等. 复合材料液体模塑成型设备及工艺开发[D]. 吉林大学,2005.
[10] 鞠金山. 碳/环氧复合材料在雷达天线侧量杆上的应用[J]. 电讯技术,1998, (2):45.
[11] 张明龙,尹昌平,梁济丰,育加余,曾竟成,等. 复合材料柔性RTM工艺的研究进展[J]. 材料导报,2007.
[12] 刘建超,左仓,高克洲. 固体火箭发动机复合裙成型工艺研究[J]. 固体火箭技术,2001, (1):64.
[13] 董永祺, 等. 我国树脂基复合材料成型工艺的发展方向[J]. 纤维复合材料,2003,(2):32-34.
[14] 胡美华,祁小东,王宁, 等. 国内树脂传递模塑技术的研究进展[J]. 高科技纤维与应用,2006,4.
[15] Lehmann U, et al. Cores lead to an automated production of hollow composite parts in resin transfer moulding[J]. Comp Part A, 1998, (29):803.
[16] 李新华, 祝颖丹, 王继辉, 高国强, 等. 沟槽型真空注射成型工艺的研究[J]. 复合材料学报,2003.
[17] H amm am i A.Gebart B R. Experin ental investigation of the vacuum infusion processl[A]. In Pmceedings of ECCM-8[C].1998.
[18] 魏俊伟,张用兵,郭万涛,等. 真空辅助成型(VARTM)工艺研究进展[J]. 材料开发与应用,2010.
[19] 魏俊伟,张用兵,郭万涛,等. 真空辅助成型(VARI)工艺研究进展[J]. 材料开发与应用, 2010, 6:99-104.
[20] 郑澎中,等. VARTM工艺浸润过程及其应用基础研究[D]. 北京大学,2011.
[21] 乔东,胡红,罗永康,等. 轻型树脂传递模塑(RTM-Light)成型工艺技术[C]. 玻璃钢/复合材料增刊(第十七届玻璃钢/复合材料学术年会论文集),2008. 182-186.
[22] Kruckeriberg T, Allata P, Baker M, Blamires M, Croucher M, Szeyka S, Qi B, Raju J,Stanni:ng R,Varbola M, Wells T. Innovation Network Program Manufacturing Report[R]. Australia: CRC-ACS, 1997.
[23] H. Benson Dexter. Development of Textile Reinforced Composites for Aircraft Structures[R]. Kyoto, Japan: the 4th International Symposium for Textile Composites Kyoto Institute of Technology, October, 12-14.
[24] Infusion molding Process[J]. Polymer Composites, 2000.
[25] 郭泓,陈淳,高国强,等. SCRIMP成型工艺研究[J]. 玻璃钢/复合材料, 2001,11:36-38.
[26] 张彦飞,刘亚青,杜瑞奎,等. RTM工艺过程中气泡形成机理及排除方法研究进展[J]. 宇航材料工艺,2006,(5):7-11.
[27] 刘兆麟, 程灿灿, 等. 复合材料液体模塑成型工艺研究现状[J]. 山东纺织科技,2011.
[28] 杨萍. 脉动灌注:一种新的液体模塑成型工艺[J]. 玻璃钢,2013.
[29] 昝海漪,高国强,等. 适用于工业化生产的RTM工艺装备[C]. 玻璃钢学会第十五届全国玻璃钢/复合材料学术年会论文集,2003.

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHU Hongwei, LIU Ke, ZHAO Changfang. Preparation of carbon fiber composite honeycomb structures and mechanical behavior of axial crush [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 5-11.
[2]	YIN Zhihao, GE Chaokun, XU Ping, TIE Ying, ZHANG Zhenzhen, JU Guang. Effect of EMAA stitching pattern on impact resistance of composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 12-18.
[3]	LIU Yanpeng, HAN Yuze, REN Zhongjie, REN Mingfa. Study on tensile and compression failure behavior of ultra-thin-ply carbon fiber reinforced composite panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 19-25.
[4]	HUANG Miaolin, FANG Hai, HUO Ruili, CHEN Hang. UV aging properties of five types of plant fibers/polyethylene wood plastic composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 26-33.
[5]	XING Xiaolong, HUANG Jinxin, ZHANG Jian, LIU Yi, RUAN Yingbo, ZHANG Chengshuang. Remodelable phenolic resin and its composites based on dynamic boronic ester bonds [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 34-42.
[6]	HOU Zhenhong, LU Qi, ZHAO Xingnuo, XU Jinwen, XIA Hongwei, ZHANG Song, HOU Ruigang, ZHOU Quan. Preparation and properties of TDE-85 resin system strengthened and toughened by biphenyl epoxy resin [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 43-48.
[7]	YAO Zhuojun, HAO Shang, LI Qianfu, YANG Zhengqiang, ZHANG Yanda, LIU Qianli. Preparation and properties of bisphenol M cyanate ester resin for hot melt prepreg [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 49-53.
[8]	ZHANG Jinguang, CHEN Rui, DOU Yukuan, LU Jikun, WEN Xianglong. Vibration band gap characterization of four-ligament chiral sandwich structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 54-61.
[9]	SU Hailiang, MA Lianhua, ZHAN Xin, QIN Jirong, ZHANG Yanhui. Lager optimization design of CFRP battery-pack enclosure using entropy-based TOPSIS approach [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 62-68.
[10]	XU Quanwei, GUO Xiaofeng, QIAO Shujie, LI Siqing, CHE Jiangning. Prediction of the ultimate loads and structural optimization design for the wind turbine blades with glass-carbon laminate based on neural network [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 69-74.
[11]	XU Jun, CUI Xiaopeng, WANG Xiangdong, LI Chengliang, HUANG Huixiu. Research of the influence of milled carbon fiber pollution on lightning protection of wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 75-79.
[12]	ZHANG Dichao, YAN Gang, YU Xinfei. Experimental study on electrical heating stracture of composite based on laser-induced graphene [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 80-86.
[13]	QIAN Yinmin, SHEN Hanfeng, WANG Tao, ZHANG Kaijin. Research on the confinement effect of fiber-reinforced polymer materials reinforced concrete [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 87-95.
[14]	XING Hairui. Design and verification of repair process for wind turbine blade with penetrating damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 96-105.
[15]	XUAN Shanyong, WANG Xiaopei, WANG Zhiyuan, ZHANG Nan, FU Bin, FAN Xin. Experimental study on compressive properties after high velocity impact of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 106-112.