INVESTIGATION ON WEAR PROPERTY OF ABRASION-RESISTANT COMPOSITES MANUFACTURED BY INTEGRATIVE MOULDING

Abstract

Abstract: This article made a try on the prepration of abrasion-resistant composites by integrative RTM moulding. Wear testing of said composites was performed. Surface profiles of samples after wearing test were drawn by Phase Shift MicroXAM-3D. Granularity ansysis of hardness particle which was the main component of abrasion-resistant coating was conducted by laser granularity analyst. The inside microstructure of abrasion-resistant composites was observed by scanning electron microscope. The results demonstrated that the friction coefficient was coherent with ultimate indent depth, namely, the less the friction coefficient was, the less indent depth was. The use of abrasion-resistant composites in high speed conditions could be limited because resin was the matrix of abrasion-resistant coating.

Key words: composite, coat, friction coefficient, indent depth

CLC Number:

TB332

ZHANG Lian-wang, LI Bao-wei, ZHONG Xiang-yu, BAO Jian-wen. INVESTIGATION ON WEAR PROPERTY OF ABRASION-RESISTANT COMPOSITES MANUFACTURED BY INTEGRATIVE MOULDING[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(9): 83-86.

References

[1] 陈祥宝, 张宝艳, 邢丽英. 先进树脂基复合材料技术发展及应用现状. 中国材料进展, 2009, 28(6): 2-11.
[2] 吴良义, 罗兰, 温晓蒙. 热固性树脂基体复合材料的应用及其工业进展. 热固性树脂, 2008, 23: 22-31.
[3] 益小苏, 张明, 安学锋, 等. 先进航空树脂基复合材料研究与应用进展. 工程塑料应用, 2009, 37(10): 72-76.
[4] 贾志刚. 树脂基复合材料隔热涂层的研究进展. 材料保护, 2002, 35(2): 7-8.
[5] Meador MA, Sutter JK, Leissler G, et al. Coatings for high temperature polymer composites. 46th International SAMPE Symposium and Exhibition. 2001. 572-585.
[6] Naik Subhash K, Macri Francis G, Dennis K, et al. Erosion coatings for high temperature polymer composites. Proceedings of the 44th International SAMPE Symposium. 1999. 68-81.
[7] Mikica Ivosevic, Richard Knight, Surya R Kalidindi, et al. Erosion/oxidation resistant coatings for high temperature polymer composites. High Performance Polymers, 2003, 15: 503-517.
[8] Amar Patnaika, Alok Satapathyb, Navin Chandc, et al. Solid particle erosion wear characteristics of fiber and particulate filled polymer composites. Wear, 2010, 268: 249-263.
[9] 郭面焕, 刘爱国, 高嘉爽, 等. 树脂基复合材料用陶瓷涂层防护性能分析. 焊接学报, 2005, 26(11): 13-16.
[10] 陈锦松, 刘爱国. 一种在环氧树脂基碳纤维复合材料制品表面喷涂陶瓷的工艺. 中国专利: ZL200710026772.2, 2007-02-08.
[11] 赫晓东, 姜久兴, 孙冠宏. 等离子喷涂工艺在树脂材料表面制备氧化铝陶瓷涂层方法. 中国专利: ZL201110184150.9, 2011-07-04.
[12] 赫晓东, 孙跃, 孙冠宏. 一种在树脂材料表面制备氧化铝陶瓷涂层的方法. 中国专利: ZL201110402960.7, 2011-12-07.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[4]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[5]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	FENG Zhenhui, WANG Zhe, ZENG Jie, CHEN Binbin, FENG Chunle, ZHOU Fan. A method for optical fiber impact localization and load history reconstruction of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 52-56.
[8]	ZHANG Dewei, WEI Wei, ZHANG Pin, WANG Qi, ZHAO Cong, AN Luling. Shape control of aircraft composite components based on measured data [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 57-66.
[9]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[10]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[11]	CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.
[12]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[13]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.
[14]	XU Lin, LIU Chuanjun, ZHAO Chongshu. Application and development trends of composite materials in civil aircraft [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 98-104.
[15]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.