RESEARCH OF A NEW METHOD ABOUT THE HALF COMPOSITE LENTICULAR TUBE ADVANCED PULTRUSION

Abstract

Abstract: To improve the straightness of the composite lenticular tube, a solution of "Moving Mold Avanced Pultrusion (MMADP)" was proposed with analyzing shortcomings of the advanced pultrusion technique in manufacturing the lenticular tube. A new advanced pultrusion system for lenticular tube was built up and the pultrusion test was conducted. The test results showed that the straightness of composite lenticular tube were improved from 3mm/m up to 0.5mm/m.

Key words: lenticular tube, advanced pultrusion, straightness, moving mold advanced pultrusion

CLC Number:

TB332

YANG Xing-rui, XIAO Jian, QI Jun-wei, XIAO Jun. RESEARCH OF A NEW METHOD ABOUT THE HALF COMPOSITE LENTICULAR TUBE ADVANCED PULTRUSION[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(6): 62-65.

References

[1] 刘雄亚. 复合材料工艺及设备[M]. 武汉: 武汉工业大学出版社, 1997. 253-254.
[2] 刘辉. 拉挤模具及预成型设计加工综述[J]. 玻璃钢/复合材料, 2012, 1.
[3] T G 古托夫斯基. 先进复合材料制造技术[M]. 北京:化学工业出版社,2004. 203-230.
[4] Dale Brosius. Advanced Pultrusion Takes Off In Commercial Aircraft Structures [EB/OL]. http://www.compositesworld.com/articles/advanced-pultrusion-takes-off-in-commercial-aircraft-structures, 2003.
[5] Okamoto M, Kuriyama S. Method and apparatus for molding thermosetting composite material[P]. European Patent EP: 1547753, 2005-6-29.
[6] 齐俊伟, 李勇, 肖军. 先进拉挤成形技术及其在大飞机复合材料结构中的应用[J]. 航空制造技术, 2011, 15: 18.
[7] 罗鹏, 齐俊伟, 肖军, 等. 预浸料拉挤成型装备技术研究[J]. 玻璃钢/复合材料, 2011, (2): 43-47.
[8] 齐俊伟, 肖健, 邓磊明, 等. 基于先进拉挤工艺的C型梁预成型变形分析[J]. 航空制造技术, 2012, (19): 88-91.
[9] 宋伟, 齐俊伟, 肖军, 等. 碳纤维/环氧预浸料的热固化工艺研究[J]. 玻璃钢/复合材料, 2011, (1).
[10] 罗鹏. 复合材料先进拉挤工艺设备的方案研究和热压实验[D]. 南京: 南京航空航天大学, 2011.
[11] 宋伟. 复合材料构件先进拉挤工艺化研究[D]. 南京:南京航空航天大学,2011.
[12] 邓磊明. 先进拉挤П型梁工艺参数控制与性能研究[D]. 南京: 南京航空航天大学, 2012.
[13] 窦冲. 帽型梁先进拉挤热压装置及制件的性能研究[D]. 南京:南京航空航天大学,2013.
[14] 程琨. 工字梁先进拉挤成形装备技术研究[D]. 南京:南京航空航天大学,2013.
[15] 李团结, 马小飞. 大型空间可展开天线技术研究[J]. 空间电子技术, 2012, (3): 8.
[16] 陈务军, 张淑杰. 空间可展结构体系与分析导论[M]. 北京: 中国宇航出版社, 2006. 1-60
[17] 白江波,熊峻江,高军鹏,等.可折叠复合材料豆荚杆的制备与验证[J].航空学报,2011,32(7):1217-1223.