DISCUSSION ON THE BOM MODULARIZATION MANAGEMENTBASED ON WIND TURBINE BLADE

Abstract

Abstract: BOM is the most basic data for enterprise management in the wind power blade industry, and is applied to multiple aspects. However, with the increasing fierce competition in the new energy industry, the traditional BOM management method cannot meet the needs of customized and fast delivery. This paper analyzed the problems of the traditional BOM management method in the wind turbine blade manufacturing process, and discussed the method of BOM configuration and BOM modularization. In this paper, the BOM modularization creation principles and the method to improve the BOM data accuracy was discussed. In conclusion, the BOM configuration method can reduce data redundancy and improve BOM management efficiency.

Key words: wind turbine blade, BOM, configuration, modularization

CLC Number:

TB332

LIU Yan, SONG Jie, ZHAO Li-yan, GAO Guo-qiang. DISCUSSION ON THE BOM MODULARIZATION MANAGEMENTBASED ON WIND TURBINE BLADE[J]. Fiber Reinforced Plastics/Composites, 2019, 0(10): 96-101.

[1]	JIN Xiangxiang, MA Yuanzhuo, ZHAO Zhenzhou, XU Bofeng, LI Hongshuang. Parametric design and optimization of composite wind turbine blade [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 39-44.
[2]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.
[3]	WEI Lijiang, QIU Ruilei, WANG Ganwu, XIE Bowu, LI Mingzhi, FENG Wei. Advances in pultruded composites for large wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(7): 116-121.
[4]	XU Qiang, ZHANG Xiyue, HUANG Huixiu, WANG Zhiwei, LIU Chuanrui. Application status and development trend of pultruded plates for wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(6): 123-128.
[5]	YANG Dexu, LAN Haijin, YIN Xiuyun. Analysis of rain erosion testing technology for wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 121-128.
[6]	XU Jun, CUI Xiaopeng, WANG Xiangdong, LI Chengliang, HUANG Huixiu. Research of the influence of milled carbon fiber pollution on lightning protection of wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 75-79.
[7]	XING Hairui. Design and verification of repair process for wind turbine blade with penetrating damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 96-105.
[8]	WANG Quan, XIA Wei, YANG Jianzhong, XU Tangjie, WANG Fengyun. Study on hierarchical optimized design of structural topology and layer for the wind turbine blade [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(11): 69-75.
[9]	MAO Yasai, MAO Yimei, PENG Bingbing, MU Jiaquan. Application research of laser treatment in the wind turbine blade pultruded planks [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(11): 114-119.
[10]	ZHANG Rui, WEN Chuanbo. WTB-Net: A lightweight wind turbine blade surface defect recognition algorithm based on ShuffleNet V2 [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(8): 66-71.
[11]	LIU Jingyu, YUAN Wei, SONG Houli, MEI Tongrui. Study on quality defects of wind turbine blades caused by thick light wood core [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(5): 80-85.
[12]	GAO Xiang, YU Guang’an, LIU Zhiqiang, XI Zhenzhao, LIU Fangfang, SONG Xiaofei, QIN Zhiwen. Stiffness analysis of embedded bushing with stud bolt connection in wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(11): 90-95.
[13]	ZHAO Xiong-xiang, SUN Peng-wen, LI Jian-dong. Optimization design of ply structure of wind turbine blade based on strain energy [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(7): 20-24.
[14]	YUAN Wei-hua, ZHANG Ju-fang, CHEN Wen-guang, LI Jun-xiang. Fatigue finite element analysis method research of wind turbine extending bladed structural adhesive [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(4): 27-31.
[15]	ZHU Jia-wei, WEN Chuan-bo. Defect detection of wind turbine blade based on improved SSD [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(3): 38-44.

DISCUSSION ON THE BOM MODULARIZATION MANAGEMENTBASED ON WIND TURBINE BLADE

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments