大型复合材料风电叶片回收技术的现状与发展趋势

doi:10.19936/j.cnki.2096-8000.20250228.019

复合材料科学与工程 ›› 2025, Vol. 0 ›› Issue (2): 151-156.DOI: 10.19936/j.cnki.2096-8000.20250228.019

• 综述 • 上一篇

大型复合材料风电叶片回收技术的现状与发展趋势

王宝龙¹, 刘锦帆¹, 李成良^1,2*

1.中材科技风电叶片股份有限公司,北京 100191;
2.武汉理工大学材料科学与工程学院,武汉 430070

收稿日期:2023-11-20 出版日期:2025-02-28 发布日期:2025-03-25
通讯作者: 李成良(1981—),男,硕士,高级工程师,研究方向为复合材料叶片开发,lichl@sinomatech.com。
作者简介:王宝龙(1988—),男,博士,工程师,研究方向为风电叶片复合材料技术研究。
基金资助:
中国建材集团攻关专项(2021HX1617);江苏省碳达峰碳中和科技创新专项(BE2022008)

Research status and development trend of large composite wind power blade recycling technology

WANG Baolong¹, LIU Jinfan¹, LI Chengliang^1,2*

1. Sinoma Wind Turbine Blade Co., Ltd., Beijing 100191, China;
2. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2023-11-20 Online:2025-02-28 Published:2025-03-25

摘要/Abstract

摘要： 以风电为代表的新能源产业近年来蓬勃发展。风电叶片材料中的环氧树脂具有稳定的化学结构,导致风电叶片在自然环境下的降解速度极为缓慢;随着风电叶片的大量服役,生命周期结束和报废的叶片由于无法处理而占用了大片土地,给环境造成了巨大的压力。本文通过梳理国家政策导向,指出了风电叶片回收的迫切性,列举了目前主流的风电叶片回收处理技术,包括机械回收、热回收、化学回收及可回收叶片技术等,系统性分析了各回收技术的差异,探讨了未来叶片回收领域的需求与发展前景。

关键词: 风电叶片, 回收技术, 复合材料, 发展趋势

Abstract: The new energy industry which represented by wind power has been booming in recent years. Due to the stable chemical structure of epoxy resin in wind power blade, the degradation of blades is extremely slow in natural environment. With large numbers of blades servicing, the end of life cycle and scrapped blades occupy a large area of land, causing the huge environment problem. By sorting out the national policy guidance, this paper points out the urgency of wind power blade recycling and lists the current blade recycling technologies, including mechanical recovery, pyrolysis, chemical recovery and recyclable blade. The review analyzes the differences among various recycling technologies systematically. This paper also discusses the demand in future and development prospects in the recycling field.

Key words: wind power blade, recycling technology, composites, development trend

中图分类号:

TB332

王宝龙, 刘锦帆, 李成良. 大型复合材料风电叶片回收技术的现状与发展趋势[J]. 复合材料科学与工程, 2025, 0(2): 151-156.

WANG Baolong, LIU Jinfan, LI Chengliang. Research status and development trend of large composite wind power blade recycling technology[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 151-156.

参考文献

[1] 舟丹. 以能源结构转型推动我国实现“碳中和” [J]. 中外能源, 2022, 27(4): 61.
[2] 我国可再生能源发电总装机突破13亿千瓦[J]. 电力勘测设计, 2023(7): 71.
[3] 王国威, 王清飞, 张越, 等. 老旧风电机组叶片回收调研分析报告 [C]//中国农业机械工业协会风力机械分会. 第十届中国风电后市场交流合作大会论文集. 大连: 2023: 337-344.
[4] CHEN J, WANG J, NI A. Recycling and reuse of composite materials for wind turbine blades: an overview[J]. Journal of Reinforced Plastics and Composites, 2019, 38(12): 567-577.
[5] 中华人民共和国统计局. 中国统计年鉴 [M]. 北京: 中国统计出版社, 2023.
[6] 申恒霞. 废弃塑料处理工程中的环境保护研究[J]. 塑料工业, 2016, 44(1): 12-15.
[7] 闫鸿琛, 石峰晖, 张宝艳, 等. 多官能苯酚型环氧树脂对自黏性环氧树脂复合材料热性能及粘接性能的影响[J]. 复合材料科学与工程, 2023(8): 34-38.
[8] 许淳瑶, 葛立超, 冯红翠, 等. 风力发电现状及叶片组成与回收利用综述[J]. 热力发电, 2022, 51(9): 29-41.
[9] 郭盼, 齐晓蕾, 谢斐, 等. 浅析退役风电叶片处理回收与再利用[J]. 东方电气评论, 2022, 36(4): 10-14.
[10] 刘靖宇, 袁炜, 宋厚利, 等. 厚轻木芯材造成的风电叶片质量缺陷研究[J]. 复合材料科学与工程, 2023(5): 80-85.
[11] LIU J K, WANG S P, PENG Y Y, et al. Advances in sustainable thermosetting resins: from renewable feedstock to high performance and recyclability[J]. Progress in Polymer Science, 2021, 113: 101353.
[12] RANGELOV M, NASSIRI S, HASELBACH L, et al. Using carbon fiber composites for reinforcing pervious concrete[J]. Construction and Building Materials, 2016, 126: 875-885.
[13] MASTALI M, DALVAND A, SATTARIFARD A. The impact resistance and mechanical properties of the reinforced self-compacting concrete incorporating recycled CFRP fiber with different lengths and dosages[J]. Composites Part B: Engineering, 2017, 112: 74-92.
[14] BADANOIU A, HOLMGREN J. Cementitious composites reinforced with continuous carbon fibres for strengthening of concrete structures[J]. Cement and Concrete Composites, 2003, 25(3): 387-394.
[15] NGUYEN H, CARVELLI V, FUJII T, et al. Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste[J]. Construction and Building Materials, 2016, 126: 321-331.
[16] WANG Y, ZHANG S, LI G, et al. Effects of alkali-treated recycled carbon fiber on the strength and free drying shrinkage of cementitious mortar[J]. Journal of Cleaner Production, 2019, 228: 1187-1195.
[17] PICKERING S J, KELLY R M, KENNERLEY J R, et al. A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites[J]. Composites Science and Technology, 2000, 60(4): 509-523.
[18] CHEN P-Y, FENG R, XU Y, et al. Recycling and reutilization of waste carbon fiber reinforced plastics: current status and prospects[J]. Polymers, 2023, 15(17): 3508.
[19] GIORGINI L, BENELLI T, MAZZOCCHETTI L, et al. Recovery of carbon fibers from cured and uncured carbon fiber reinforced composites wastes and their use as feedstock for a new composite production[J]. Polymer Composites, 2015, 36(6): 1084-1095.
[20] GINDER R S, OZCAN S. Recycling of commercial e-glass reinforced thermoset composites via two temperature step pyrolysis to improve recovered fiber tensile strength and failure strain[J]. Recycling, 2019, 4(2): 24.
[21] IRISAWA T, ARATAKE R, HANAI M, et al. Elucidation of damage factors to recycled carbon fibers recovered from CFRPs by pyrolysis for finding optimal recovery conditions[J]. Composites Part B: Engineering, 2021, 218: 108939.
[22] ZHAO Q, JIANG J, ZHANG L, et al. Simple and mild method for the recycling of carbon-fiber-reinforced bismaleimide resin composite waste[J]. ACS Sustainable Chemistry & Engineering, 2023, 11(7): 2830-2839.
[23] ZHANG L, LIU J, NIE W, et al. Degradation of anhydride-cured epoxy resin using simultaneously recyclable solvent and organic base catalyst[J]. Journal of Material Cycles and Waste Management, 2018, 20(1): 568-577.
[24] KUANG X, ZHOU Y, SHI Q, et al. Recycling of epoxy thermoset and composites via good solvent assisted and small molecules participated exchange reactions[J]. ACS Sustainable Chemistry & Engineering, 2018, 6(7): 9189-9197.
[25] AHRENS A, BONDE A, SUN H, et al. Catalytic disconnection of C—O bonds in epoxy resins and composites[J]. Nature, 2023, 617(7962): 730-737.
[26] 武俊杰. 基于碳氮键裂解的废弃风电叶片回收及资源化利用研究[D]. 兰州: 兰州大学, 2023.

大型复合材料风电叶片回收技术的现状与发展趋势

Research status and development trend of large composite wind power blade recycling technology

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	关纪文, 王玉梅, 韦丽兰, 孔德辅, 陈华, 熊超华. CFRP筋增强珊瑚骨料混凝土偏压短柱力学行为及配筋率研究[J]. 复合材料科学与工程, 2025, 0(2): 1-11.
[2]	陆春华, 李朝晖, 漆仲浩, 朱学武, 徐奕帆. 高温环境对混凝土内GFRP筋拉伸性能退化影响[J]. 复合材料科学与工程, 2025, 0(2): 12-19.
[3]	程艳雯, 赵菲, 黄振辉, 张青松, 李良勇, 习鑫强. 碱处理椰壳纤维对海水海砂混凝土力学性能影响研究[J]. 复合材料科学与工程, 2025, 0(2): 20-27.
[4]	王朔, 贾晨辉, 杨智明, 姚亚琳. 含水量对环氧/酸酐树脂性能的影响及解决措施研究[J]. 复合材料科学与工程, 2025, 0(2): 28-33.
[5]	牛芳旭, 孙超明, 贺靖, 尹航. 共固化蜂窝夹层结构长梁弯曲性能预测[J]. 复合材料科学与工程, 2025, 0(2): 34-39.
[6]	徐小魁, 潘江, 郝尚, 张娟娟, 吴春燕, 刘千立. 国产高导热中间相沥青基碳纤维复合材料性能研究[J]. 复合材料科学与工程, 2025, 0(2): 40-45.
[7]	伊文昭, 刘璐璐, 徐凯龙, 陈伟. 考虑湿热老化的单向纤维增强复合材料纵向脱黏行为的数值模拟[J]. 复合材料科学与工程, 2025, 0(2): 46-53.
[8]	闫珊, 付天宇, 许家忠, 史新民. 基于改进遗传算法的纤维张力模糊控制研究[J]. 复合材料科学与工程, 2025, 0(2): 54-61.
[9]	高文明, 刘琛, 聂海平, 阳铭广, 王显峰. 复合材料飞机副油箱结构铺层设计及性能分析[J]. 复合材料科学与工程, 2025, 0(2): 70-81.
[10]	杨瑞瑞, 王雅婷, 冉晓璐, 刘万双. 硅烷改性氧化石墨烯增韧乙烯基酯树脂[J]. 复合材料科学与工程, 2025, 0(2): 82-90.
[11]	张月义, 唐小惠, 高尚兵, 李刚, 杨小平. 氰酸酯树脂与高强高模型碳纤维的界面相容和性能匹配研究[J]. 复合材料科学与工程, 2025, 0(2): 91-98.
[12]	吕林泽, 张芝芳, 郑铭峰, 江剑. 温湿环境下CFRP层合板的弯曲疲劳寿命与结构频率的关联性研究[J]. 复合材料科学与工程, 2025, 0(2): 99-107.
[13]	房恩惠, 杨树桐, 庞瑞阳, 孙忠科, 兰天. 树脂预浸技术提升CFRP-混凝土界面力学性能研究[J]. 复合材料科学与工程, 2025, 0(2): 117-128.
[14]	柯灿阳, 文传博. 基于多注意力机制的双通道模型对风机叶片表面目标识别[J]. 复合材料科学与工程, 2025, 0(2): 129-136.
[15]	颜丙越, 张卓, 尹立, 何剑飞. 基于数字单元法的平纹织物压实形态变化研究[J]. 复合材料科学与工程, 2025, 0(2): 137-144.