THE APPLICATION OF SHEET MOLDING PROCESS IN THE PRODUCTION OF THE ANTENNA ENVELOP OF PHASED ARRAY RADAR

Abstract

Abstract: By comparing three common molding processes for composite materials, it is found that the sheet molding compound process is suitable for the batch production of the antenna envelop of phased array radar. In this paper, the processes of manufacture and testing were briefly introduced. The results of mechanical testing as well as antenna performance verification showed that this envelop fulfilled the requirements of radar. Nowadays, this process has been applied in many radar systems.

Key words: sheet molding compound (SMC), phased array radar, antenna envelop

CLC Number:

TB332

WANG Wei,FANG Fang. THE APPLICATION OF SHEET MOLDING PROCESS IN THE PRODUCTION OF THE ANTENNA ENVELOP OF PHASED ARRAY RADAR[J]. Fiber Reinforced Plastics/Composites, 2018, 0(7): 93-96.

[1]	WANG Weilun, CAO Zihe, YU Xingchen, LU Yixian, CAO Dongfeng, HU Haixiao, JI Yundong, LI Shuxin. Research on residual strain monitoring and failure behavior of thick L-shaped composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 1-10.
[2]	QIN Cheng, ZHA Yibin, ZHANG Lianhe, REN Hao, CHENG Yanan, LI Yongfeng, LIU Yong, ZHANG Hui. Study on the structure and properties of unidirectional carbon fiber fabric composite materials with different stitch densities and layers [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 11-19.
[3]	SUN Shiyong, LI Hailin, WANG Junlong. Pore defects characterization and elastic parameters prediction of needle-punched ceramic matrix composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 20-27.
[4]	YUE Wuyang, LUO Hao, WU Yibo, ZHOU-HE Lezi, ZHOU Huamin. Permeability prediction model of two-dimensional fiber fabrics with shear deformation based on ellipse tensor superposition [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 28-36.
[5]	HE Xiaohong, LÜ Jian, ZHAI Shaojie, YANG Shangyu, ZHAO Xinbo. Experimental investigation and strength analysis of hybrid adhesive-woven bonding joints in steel/carbon fiber reinforced plastics [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 37-46.
[6]	HUANG Xuanhong, WANG Yonggang. The value of mixed elements splitting factor and analysis of static problems in laminated plates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 47-56.
[7]	YU Feng, SHI Kun, GUAN Yucong, FANG Yuan, XU Bo. Study analysis of PVC-CFRP confined concrete column-RC beam exterior joints with core steel tube under low cyclic loading [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 57-67.
[8]	LI Yu, SI Xiaoliang, HUANG Yeyuan, LI Zhibao, DUAN Zemin. Experimental and simulation study on lightning damage and protection of carbon fiber composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 68-73.
[9]	DU Xuwei, NIU Xuejuan. Research on improving the interlayer fracture performance of CFRP laminates with nano ZnO resin films [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 74-81.
[10]	CUI Wei, PENG Huanling, WANG Hongwei, LEI Hongmei. Damage evolution and resistivity response analysis of interlaminar mode Ⅰ fracture for continuous fiber reinforced ceramic matrix composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 82-88.
[11]	WU Yicheng, LIAO Yingqiang, ZHANG Chi. Study of friction behavior between carbon fiber and mandrel material in wet winding [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 89-95.
[12]	ZHANG Gaotao, FANG Zhigang, NI Aiqing, BIAN Tianya, LI Xiang, Li Liang, WANG Jihui. Research on the failure mode of composite bonded-bolted hybrid connection structures under bending loads [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 96-102.
[13]	GE Ping, KONG Peng, MA Guorun, TANG Yuhang. Correlation of heat distortion temperature and glass transition temperature of glass fiber reinforced unsaturated polyester resins and their matrix resins [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 103-108.
[14]	LIU Cong, XIA Shaoling, XU Jixian, ZHAO Congcong, GUO Shengdong, JIA Yu. Preparation and properties of functionalized graphene oxide modified phenolic resin microfoam composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 109-116.
[15]	JI Fengchun, PENG Zhihang, YANG Xin, XIANG Yang, FENG Jian. Preparation and performance study of hybridphenolic resin/glass fiber insulation tiles [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 117-124.

THE APPLICATION OF SHEET MOLDING PROCESS IN THE PRODUCTION OF THE ANTENNA ENVELOP OF PHASED ARRAY RADAR

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments