| [1] |
HE Xiaohong, LÜ Jian, ZHAI Shaojie, YANG Shangyu, ZHAO Xinbo.
Experimental investigation and strength analysis of hybrid adhesive-woven bonding joints in steel/carbon fiber reinforced plastics
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 37-46.
|
| [2] |
YU Feng, SHI Kun, GUAN Yucong, FANG Yuan, XU Bo.
Study analysis of PVC-CFRP confined concrete column-RC beam exterior joints with core steel tube under low cyclic loading
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 57-67.
|
| [3] |
ZHANG Gaotao, FANG Zhigang, NI Aiqing, BIAN Tianya, LI Xiang, Li Liang, WANG Jihui.
Research on the failure mode of composite bonded-bolted hybrid connection structures under bending loads
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 96-102.
|
| [4] |
GE Ping, KONG Peng, MA Guorun, TANG Yuhang.
Correlation of heat distortion temperature and glass transition temperature of glass fiber reinforced unsaturated polyester resins and their matrix resins
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 103-108.
|
| [5] |
SHI Linxin, WANG Haijun, WANG Honglei.
Lightweight design and optimization of CFRP material mining helmet
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 125-134.
|
| [6] |
ZHANG Ye, GUO Junhua, TONG Zongpeng, YAO Tao.
Vibration characterization of marine suspended composite base GFRP columns
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 135-142.
|
| [7] |
ZHANG Jingli, KANG Yunjian.
Experimental research on dynamic mechanical properties of concrete confined by carbon fiber sheet under high temperature
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 22-29.
|
| [8] |
SUN Tingting, ZHANG Honghua, Muhammad Usman Ghani, LI Wei.
Research on axial compression of concrete reinforced with carbon fibre triaxial fabric composites with different pore sizes
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 87-95.
|
| [9] |
GUO Mengpan, CHEN Guoxin, ZHANG Yichen, LIU Jian.
Research on the mechanical performance of GFRP-Y type tension components in sandwich insulation composite walls
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 96-105.
|
| [10] |
GUAN Jiwen, WANG Yumei, WEI Lilan, KONG Defu, CHEN Hua, XIONG Chaohua.
Study on the mechanical behavior and reinforcement ratio of eccentrically loaded coral aggregate concrete short columns reinforced with CFRP bar
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 1-11.
|
| [11] |
LU Chunhua, LI Zhaohui, QI Zhonghao, ZHU Xuewu, XU Yifan.
Effect of high temperature environment on degradation of tensile properties of GFRP bars in concrete
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 12-19.
|
| [12] |
CHENG Yanwen, ZHAO Fei, HUANG Zhenhui, ZHANG Qingsong, LI Liangyong, XI Xinqiang.
Study on the effect of alkali-treated coir fibers on the mechanical properties of seawater sea sand concrete
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 20-27.
|
| [13] |
ZHOU Jie, ZHAO Cong, ZHOU Laishui.
Influence of silicone rubber core mold hole occupancy ratio on dimensional shape force transfer effect and wall panel molding quality for co-curing of hat-shaped reinforced wall panels
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 62-69.
|
| [14] |
GAO Wenming, LIU Chen, NIE Haiping, YANG Mingguang, WANG Xianfeng.
Lamination design and performance analysis of composite aircraft auxiliary fuel tank structure
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 70-81.
|
| [15] |
XIAO Xiao, MA Chao, ZHANG Tieshan.
Seismic performance analysis of a new type end plate joint of GFRP beam-column with bolted and bolt-adhesive hybrid connection
[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 108-116.
|
