THE DESIGN AND MANUFACTURE TECHNIQUES OF BUS COMPOSITE-BODY MOULD

Abstract

Abstract: This paper makes a detailed exposition on composite bus-body mould design and manufacture technology by referencing the former experience on engineering. Then the performance testing of mould products was introduced. A variety of structure and function design are used in the process of making the mould, such as stiffness reinforced structure, demolding device consist of lifting mechanism and insert blocks, temperature field stability control system, double vacuum suction system, and sliding surface adjustment system etc. The key points were introduced during manufacturing process, and the testing result of the performance reveal that this mould can meet every technical requirement. Finally, the final service properties can fulfill the requirements of customers well, which verified the feasibility of the design and manufacture technology.

Key words: mould, bus, design, manufacture

CLC Number:

TB332

HUANG Shang-hong, LI Yi-quan, LI Rui-ying, WU Jian-dan. THE DESIGN AND MANUFACTURE TECHNIQUES OF BUS COMPOSITE-BODY MOULD[J]. Fiber Reinforced Plastics/Composites, 2019, 0(3): 70-75.

[1]	SHI Linxin, WANG Haijun, WANG Honglei. Lightweight design and optimization of CFRP material mining helmet [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 125-134.
[2]	GAO Wenming, LIU Chen, NIE Haiping, YANG Mingguang, WANG Xianfeng. Lamination design and performance analysis of composite aircraft auxiliary fuel tank structure [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 70-81.
[3]	ZHANG Guiming, ZU Lei, NING Wujun, ZHANG Qian, ZHENG Xuanxuan, WANG Huabi, LI Debao, LU Guojun, CAI Tianqi. Research on compressive behavior and optimization design of composite skirt [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 42-50.
[4]	SUN Shiping, CHANG Mengyuan, HU Zheng. Optimization design of absorption performance for variant Poisson’s ratio honeycomb sandwich structure [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 67-75.
[5]	ZHOU Yongjun, ZHOU Kun, LI Hongzhou. Layup design of T-type battery box with carbon fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 117-123.
[6]	LI Ming, FAN Weichao, SUN Qian, YANG Dongjin, JU Xiangwen, FANG Yaning, WU Ju. Layout optimization design on truss rib structure of civil aircraft center wing [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 75-83.
[7]	ZHAI Suyu, HUANG Shijun, CHEN Weiting, ZHANG Zhenwei, LUO Yaosen, LI Chenhui, SU Zhizhong. Synthesis of melamine solid waste modified phenolic resin and its influence on the properties of moulding compounds [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 19-24.
[8]	LIU Feng, QIAO Yu, LI Xuejiang, DOU Guangzheng. Design and analysis of the back-thrust drone fuselage with balsa core and carbon fiber sandwich composite structure [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(4): 56-62.
[9]	ZHANG Heng, FANG Hai, WANG Xiaochun, XIA Guolong, XU Shuang. Test and design of bending performance of small-angle winding composite revetment pipe piles [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(4): 90-96.
[10]	ZHANG Bin, ZHAO Jing, WANG Shijie. Influence of Kagome lattice structure parameters on its compression characteristics and lightweight design [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(3): 35-42.
[11]	SU Tong, HU Guoxin, LIU Zhen. Structural optimization design of all-carbon fiber composite solar UAV wing [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(3): 79-83.
[12]	ZHAO Zehua, ZHANG Zhaoheng, XING Yajuan, WANG Boyao, LIN Jialun, YANG Yi, GAO Kun. Research progress of new sandwich structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(3): 121-128.
[13]	TIAN Huifang, LIU Jiao, WU Yingfeng. Design and analysis of surface treatment device for filament wound plastic liner [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 96-101.
[14]	XING Xiaolong, HUANG Jinxin, ZHANG Jian, LIU Yi, RUAN Yingbo, ZHANG Chengshuang. Remodelable phenolic resin and its composites based on dynamic boronic ester bonds [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 34-42.
[15]	XU Quanwei, GUO Xiaofeng, QIAO Shujie, LI Siqing, CHE Jiangning. Prediction of the ultimate loads and structural optimization design for the wind turbine blades with glass-carbon laminate based on neural network [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 69-74.

THE DESIGN AND MANUFACTURE TECHNIQUES OF BUS COMPOSITE-BODY MOULD

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments