STUDY ON THICKNESS OF LINING LAYER OF FLEXIBLE PIPE BONDED BY GLASS FIBER REINFORCED COMPOSITES FOR OIL AND GAS TRANSMISSION

Abstract

Abstract: The inner liner plays a supporting role in the manufacturing process of glass fiber reinforced composite bonded flexible pipe. To ensure the strength of the lining layer, the method of increasing wall thickness is usually adopted, which will not only increase the manufacturing cost of the pipe, but also reduce the flexibility of the pipe. In order to ensure the accuracy of the finite element simulation results, the mechanical properties of the material used in the lining layer were measured by mechanical properties experiments. According to the mechanical characteristics of the lining layer, the effects of winding mode, number of winding layers and hot melt temperature on the thickness of the lining layer were studied. ABAQUS finite element analysis software was used to calculate the minimum thickness of the lining layer of glass fiber reinforced composite bonded flexible pipe with a diameter of 65 mm, which provides a theoretical reference for the reasonable selection of the inner liner thickness.

Key words: bonded flexible pipe, lining layer thickness, manufacturing process, strength analysis, finite element analysis, composites

CLC Number:

TB332

LI Ping, YAN Ting-jun, LI Peng, CONG Ri-feng. STUDY ON THICKNESS OF LINING LAYER OF FLEXIBLE PIPE BONDED BY GLASS FIBER REINFORCED COMPOSITES FOR OIL AND GAS TRANSMISSION[J]. Composites Science and Engineering, 2020, 0(9): 17-24.

References

[1] 夏平原, 李诗春, 陈斌. 玻璃纤维增强连续塑料复合管道的应用性能[J]. 油气储运, 2013, 32(7): 795-798.
[2] 林珊颖. 玻璃纤维增强软管力学性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2017.
[3] 王涛. 柔性复合管在油田集输中的应用探析[J]. 中国石油石化, 2017(1): 80-81.
[4] 孙晶, 许春, 孙鹏. 聚偏二氟乙烯(PVDF)在油气管道上的应用以及经验教[J]. 中国石油和化工标准与质量, 2013, 33(24): 19-21.
[5] 魏斌, 戚东涛, 李厚补, 等. 增强热塑性复合管在酸性环境下的耐蚀性能[J]. 天然气工业, 2015, 35(6): 87-92.
[6] 张尹. 纤维缠绕增强复合管在轴对称荷载下的力学行为研究[D]. 杭州: 浙江大学, 2015.
[7] 秦升学, 刘文舒, 张弘斌, 等. 玻纤带增强热塑性复合管材管壁结构受力分析[J]. 特种结构, 2019, 36(1): 77-81.
[8] XIA M, TAKAYANAGI H, KEMMOCHI K. Analysis of multi-layered filament-wound composite pipe under internal pressure[J]. Composite Structures, 2001, 53(6): 483-491.
[9] MATENS M, ELLYIN F. Biaxial monotonic behaviors of a multidirectional glass fiber epoxy pipes[J]. Composite Part A, 2000, 31: 1001-1014.
[10] 潘俊, 张东胜, 李鹏, 等. 深海玻纤增强柔性管截面结构设计及强度分析[J]. 玻璃钢/复合材料, 2018(2): 21-27.
[11] 林珊颖, 白勇, 方攀. 内压载荷下玻璃纤维增强复合软管力学性能研究[J]. 玻璃钢/复合材料, 2017(9): 13-18.
[12] WAKAYAMA S, KOBAYASHI S, INIAI T. Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber [J]. Composites Part A Applied Science & Manufacturing, 2006, 37(11): 2002-2010.
[13] 全娇娇. 柔性复合管内衬层在介质中的性能变化规律研究[J]. 云南化工, 2019, 46(1): 161-162.
[14] 王建花. 复合材料身管残余应力研究[D]. 南京: 南京理工大学, 2007.
[15] 朱有欣. 内衬PVDF热塑层的玻璃纤维增强管制备与力学性能的研究[D]. 天津: 天津工业大学, 2014.
[16] DET NORSKE VERITAS. DNV-RPF-119[S]. Norway: Qualification of new technology, 2015.
[17] American Petroleum Institute. Recommended practice for flexible pipe 17B[S]. USA: API Publications, 2012.
[18] 石油天然气工业用非金属复合管第2部分: 柔性复合高压输送管: SY/T 6662.2—2012[S]. 2012.
[19] 何风梅, 赵灿. 缠绕式提升机卷筒强度的有限元优化设计[J]. 矿山机械, 2003, 31(11): 42-44.
[20] 吕海波. 热塑性复合材料纤维缠绕成型中的残余应力分析[J]. 导弹与航天运载技术, 2007(5): 46-50.
[21] 刘丹. 复合材料壳体热芯缠绕张力制度设计[D]. 黑龙江: 哈尔滨理工大学, 2013.
[22] 段鹏文, 王彤. 缠绕式提升机卷筒壁厚设计方法研究[J]. 煤炭工程, 2005(11): 19-20.
[23] 中华人民共和国国家质量监督检验检疫总局.热塑性塑料管材、管件维卡软化温度的测定: GB/T 8802—2001[S]. 2001.