RESEARCH PROGRESS ON THE MECHANICAL PROPERTIES OF STITCHED FOAM-CORE SANDWICH COMPOSITES

Abstract

Abstract: The stitched foam-core sandwich composite is an advanced lightweight structural material with low manufacturing cost, good delamination resistance and high structural efficiency. It has attracted the attention from aviation, aerospace and other industrial field. Stitching technology for foam-core sandwich structures is introduced. Research progress on basic mechanical properties and impact resistance of stitched foam-core sandwich composites is reviewed. The application prospect of stitched foam-core sandwich composites is also presented.

Key words: stitching, composites, foam-core sandwich, mechanical properties, impact resistance

CLC Number:

TB332

XU Xue-hong, ZHENG Yi-zhu, CHEN Chen, CHEN Ji-ping. RESEARCH PROGRESS ON THE MECHANICAL PROPERTIES OF STITCHED FOAM-CORE SANDWICH COMPOSITES[J]. Composites Science and Engineering, 2020, 0(9): 118-122.

References

[1] 徐庆林. 缝纫增强泡沫夹芯结构复合材料制备及力学性能研究[D]. 长沙: 国防科学技术大学, 2016.
[2] 李涛, 陈蔚, 成理, 等. 泡沫夹层结构复合材料的应用与发展[J]. 科技创新导报, 2009(14): 3-5.
[3] 刘永涛, 杨杰, 黄业青, 等. 泡沫夹层复合材料耐水性能研究进展[J]. 材料导报, 2011(s2): 439-443.
[4] BELINGARDI G, CAVATORTA M P, DUELLA R. Material characterization of a composite-foam sandwich for the front structure of a high speed train[J]. Composite Structures, 2003, 61(1-2): 13-25.
[5] 季苏东, 李敏, 孙志杰, 等. 斜缝与Z-pin混合增强泡沫夹层复合材料力学性能实验研究[J]. 复合材料学报, 2010, 27(4): 87-93.
[6] LASCOUP B, ABOURA Z, KHELLIL K, et al. Homogenization of the core layer in stitched sandwich structures[J]. Composites Science and Technology, 2010, 70(2): 350-355.
[7] ALMULA T A D M S, SHARIFI S, SHARIFISHOURABI G, et al. Static analysis of stitched sandwich beams with functionally graded foam core[J]. Applied Mechanics and Materials, 2013, 393: 381-386.
[8] STANLEY L E, ADAMS D O. Development and evaluation of stitched sandwich panels, NASACR-211025[R]. Washington: NASA, 2001: 1-166.
[9] 黄涛. 缝纫泡沫夹层复合材料力学性能研究[D]. 西安: 西北工业大学, 2004.
[10] TEKALUR S A, BOGDANOVICH A E, Shukla A. Shock loading response of sandwich panels with 3-D woven E-glass composite skins and stitched foam core[J]. Composites Science and Technology, 2009, 69(6): 736-753.
[11] 鄢冬冬. 基于VARTM工艺缝合泡沫夹层结构复合材料的制备及力学性能研究[D]. 南昌: 南昌大学, 2016.
[12] 马元春, 俸翔, 卢子兴, 等. 缝纫泡沫夹芯复合材料板的稳定性分析[J]. 复合材料学报, 2011, 28(2): 201-205.
[13] 杨慧, 刘兴宇, 徐东明. 缝合复合材料泡沫夹层结构稳定性研究[J]. 应用力学学报, 2015, 32(2): 299-303.
[14] 郑锡涛, 孙秦, 李野, 等. 全厚度缝合复合材料泡沫芯夹层结构力学性能研究与损伤容限评定[J]. 复合材料学报, 2006, 23(6): 29-36.
[15] SUN Q, ZHENG X T, LI Y, et al. An experimental investigation on composites through-the-thickness stitched foam core sandwich panels[J]. Key Engineering Materials, 2007, 353-358: 1443-1446.
[16] 黄涛, 矫桂琼, 潘文革. 缝纫泡沫夹层结构弯曲性能研究[J]. 材料科学与工程学报, 2006, 24(4): 535-538.
[17] WANG P Y, LEI Y, YUE Z F. Experimental and numerical evaluation of the flexural properties of stitchedfoam core sandwich structure[J]. Composite Structures, 2013, 100: 243-248.
[18] XIE W, XU F, YAN H M. Observations on mechanics properties of stitched foam-core sandwich by flexural testing[J]. Advanced Materials Research, 2012, 487: 337-341.
[19] 马元春, 韩海涛, 卢子兴, 等. 缝纫泡沫夹芯复合材料的刚度预测与试验验证[J]. 复合材料学报, 2010, 27(5): 101-107.
[20] 刘华峰, 赵凯辉, 王佩艳, 等. 缝合复合材料泡沫夹层结构的平压和剪切性能研究[J]. 中国机械工程, 2011, 22(10): 1213-1215.
[21] 郭书良, 赵龙, 黄峰, 等. Kevlar纤维缝纫泡沫芯材复合材料力学性能研究[J]. 材料科学与工艺, 2013, 21(2): 38-44.
[22] 杨慧, 刘兴宇, 张弛. 缝合复合材料泡沫夹层结构层间剪切性能研究[J]. 应用力学学报, 2016, 33(1): 105-109.
[23] 黄涛, 矫桂琼, 李野, 等. 缝纫泡沫夹层结构芯子剪切模量研究[J]. 机械强度, 2007, 29(1): 113-117.
[24] ZHENG X, GOU L, ZHENG X, et al. Prediction of impact damage on stitched sandwich composite panels[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2009, 7493: 74931J-1-74931J-7.
[25] MA J, YAN Y, LIU Y J, et al. Compression strength of stitched foam-core sandwich composites with impact induced damage[J]. Journal of Reinforced Plastics and Composites, 2012, 31(18): 1236-1246.
[26] 马健, 燕瑛. 缝合泡沫夹芯复合材料低速冲击的多尺度数值方法[J]. 复合材料学报, 2013, 30(1): 230-235.
[27] HAN F Y, YAN Y, MA J. Experimental study and progressive failure analysis of stitched foam-core sandwich composites subjected to low-velocity impact[J]. Polymer Composites, 2018, 39(3): 624-635.
[28] 胡根泉, 赖家美, 龚小辉, 等. 缝合碳纤维泡沫夹芯复合材料低速冲击及损伤检测[J]. 中国塑料, 2018, 32(9): 102-107.
[29] 龚小辉, 赖家美, 陈乐乐, 等. 缝合对泡沫夹芯复合材料低速冲击性能的影响[J]. 高分子材料科学与工程, 2018, 34(9): 63-75.
[30] 潘利剑, 刘卫平, 陈萍, 等. 缝合泡沫夹层复合材料的滚筒剥离性能[J]. 玻璃钢/复合材料, 2013(3): 39-42.
[31] LASCOUP B, ABOURA Z, KHELLIL K, et al. On the mechanical effect of stitch addition in sandwich panel[J]. Composites Science and Technology, 2006, 66(10): 1385-1398.
[32] LASCOUP B, ABOURA Z, KHELLIL K, et al. Core-skin interfacial toughness of stitched sandwich structure[J]. Composites Part B: Engineering, 2014, 67: 363-370.
[33] YALKIN H E, ICTEN B M, ALPYILDIZ T. Enhanced mechanical performance of foam core sandwich composites with through the thickness reinforced core[J]. Composites Part B: Engineering, 2015, 79: 383-391.
[34] KIM J H, LEE Y S, PARK B J, et al. Evaluation of durability and strength of stitched foam-cored sandwich structures[J]. Composite Structures, 1999, 47(1-4): 543-550.
[35] 赖家美, 鄢冬冬, 饶欣远, 等. 缝合泡沫夹层结构复合材料三点弯曲性能研究[J]. 工程塑料应用, 2016, 44(2): 101-105.
[36] 黄志超, 程梁. 未缝合与缝合玻纤泡沫夹层复合板弯曲性能研究[J]. 塑料工业, 2018, 46(8): 89-94.
[37] 田桂. 缝纫泡沫夹心复合材料的制备及力学性能表征[J]. 火箭推进, 2013, 39(6): 55-59.
[38] 仇艳慧, 徐庆林, 尹昌平, 等. 缝合增强泡沫夹芯结构复合材料力学性能研究[J]. 玻璃钢/复合材料, 2017(10): 46-52.
[39] LASCOUP B, ABOURA Z, KHELLIL K, et al. Impact response of three-dimensional stitched sandwich composite[J]. Composite Structures, 2010, 92(2): 347-353.
[40] XIA F, WU X Q. Study on impact properties of through-thickness stitched foam sandwich composites[J]. Composite Structures, 2010, 92(2): 412-421.
[41] XIA F, WU X Q, Li J L. Numerical simulation of impact responses on through-thickness stitched foam core sandwich composite[J]. Applied Composite Materials, 2013, 20(6): 1041-1054.
[42] 张广成, 何祯, 刘良威, 等. 夹层结构复合材料低速冲击试验与分析[J]. 复合材料学报, 2012, 29(4): 170-177.
[43] 邹如荣, 柳和生, 赖家美, 等. 缝合泡沫夹层复合材料低速冲击数值模拟及实验[J]. 高分子材料科学与工程, 2016, 32(9): 96-102.
[44] GUAN Z W, AKTAS A, POTLURI P, et al. The blast resistance of stitched sandwich panels[J]. International Journal of Impact Engineering, 2014, 65: 137-145.