RESEARCH PROGRESS IN CREEP PROPERTY OF THE GLASS FIBER REINFORCED PLASTIC PIPES

Abstract

Abstract: The creep will occur during the long-term use process time of glass fiber reinforced plastics, which may lead to the failure of the products. Creep property research has become an important part of the design, manufacture and application of glass fiber reinforced plastics. This paper briefly introduces the research progress of the creep property of glass fiber reinforced plastics. This paper mainly summarizes and analyzes the research progress of the mathematical models and tests related to the creep property at home and abroad of glass fiber reinforced thermosetting plastic pipes, which is a representative product of glass fiber reinforced plastics, and the current domestic and foreign standards related to the creep property of the pipes are summarized. In addition, the creep property research of glass fiber reinforced plastics in China is prospected.

Key words: glass fiber reinforced plastic pipes, glass fiber reinforced plastics, creep property, composites

CLC Number:

TB332

YANG Jie-biao, ZHANG Li-chen, WANG Zhe. RESEARCH PROGRESS IN CREEP PROPERTY OF THE GLASS FIBER REINFORCED PLASTIC PIPES[J]. Composites Science and Engineering, 2020, 0(7): 123-128.

References

[1]黄千稳. 树脂基复合材料长期性能的理论分析及其试验研究[D]. 武汉: 武汉理工大学, 2013.
[2]李悦.玻璃纤维增强塑料管长期刚度研究[D]. 武汉: 武汉理工大学, 2015.
[3]白晓宇, 张明义, 张舜泉. 全长黏结螺纹玻璃纤维增强聚合物抗浮锚杆蠕变试验研究[J]. 岩石力学与工程学报, 2015(4): 160-169.
[4]李云芳, 潘俊臣, 郎风超, 等. 碳纤维增强树脂复合材料细观蠕变性能[J/OL]. 复合材料学报:1-7[2020-7-14].http://doi.org/10.13801/j.cnki.fhclxb.20191118.001.
[5]李华东, 朱锡, 梅志远, 等. 静水压力对粘弹性功能梯度结构力学性能的影响研究[J]. 功能材料, 2010, 41(s3): 445-448.
[6]储辰辰. 风电叶片复合材料结构多尺度渐进失效机理研究[D]. 西安: 西安电子科技大学, 2018.
[7]刘鹏飞, 赵启林, 王景全. 树脂基复合材料蠕变性能研究进展[J]. 玻璃钢/复合材料, 2013(3): 109-117.
[8]马瑜, 王辉, 邵振威, 等. CFRP管件的弯曲蠕变行为试验研究[J]. 深空探测学报, 2017(4): 50-58.
[9]Nedjar B. Modeling long-term creep rupture by debonding in unidirectional fibre-reinforced composites[J]. International Journal of Solids and Structures, 2014(51): 1962-1969.
[10]Mohammadizadeh M, Fidan I, Allen M, et al. Creep behavior analysis of additively manufactured fiber-reinforced components[J]. International Journal of Advanced Manufacturing Technology, 2018(99): 1225-1234.
[11]Marina B, Claudio M, Marco S. Creep tests on GFRP pultruded specimens subjected to traction or shear[J]. Composite Structures, 2014(108): 514-523.
[12]胡建阳, 黄承智. 玻璃钢的蠕变分析[J]. 武汉工学院学报, 1989, 11(3): 16-24.
[13]梁娜, 朱四荣, 陈建中. 聚合物基复合材料在低应力下的蠕变模型[J]. 玻璃钢/复合材料, 2016(增刊): 10-13.
[14]樊建平, 沈为, 彭立华. 树脂基复合材料蠕变损伤本构方程[J]. 华中理工大学学报, 1996(24): 100-102.
[15]Pegoretti A, Kolarik J, Peroni C, et al. Recycled poly(ethylene tere-phthalate)/layered silicate nanocomposites: Morphology and tensible mechanical properties[J]. Polymer, 2004, 45(8): 2751-2759.
[16]Drozdov A D, Lejre A L H, Christiansen J D. Viscoelasticity, viscoplasticity and creep failure of polypropylene/claynanocomposites[J]. Compos Sci Technol, 2009, 69(15-16): 2596-2603.
[17]Yasushi M, Masayuki N, Masato K, et al. Effect of physical aging on the creep deformation of an epoxy resin[J]. Mechanics of Time-Dependent Materials, 2000(4): 9-20.
[18]周祝林, 杨云娣. 纤维增强塑料蠕变机理的初步探讨[J]. 玻璃钢/复合材料, 1985(4): 29-33.
[19]张军, 张永祥, 杨军. 环氧树脂胶湿热与室温环境下的蠕变行为研究[J]. 机械强度, 2015, 37(2): 237-242.
[20]薛芳, 盛磊, 谭放. 提高环氧树脂抗蠕变性能方法研究[C]//中国复合材料学会、中国航空学会、中国宇航学会、中国力学学会. 复合材料: 创新与可持续发展(下册). 中国复合材料学会, 2010: 41.
[21]高禹, 李洋洋, 高博闻, 等. HT280双马来酰亚胺树脂真空热循环下的蠕变行为[J]. 高分子材料科学与工程, 2018, 34(1): 60-66.
[22]黄发荣, 周燕, 等. 先进树脂基复合材料[M]. 北京: 化学工业出版社, 2007.
[23]Pomeroy C D. Creep of engineering materials[M]. London: 1978.
[24]Standard practice for obtaining hydrostatic or pressure design basis for "fiberglass" (glass-fiber-reinforced thermoset-ting-resin) pipe and fittings: ASTM D2992-18[S]. 2018.
[25]Standard test method for long-term ring-bending strain of "fiberglass" (glass-fiber-reinforced thermosetting-resin) pipe: ASTM D5365-18[S]. 2018.
[26]Glass-reinforced thermosetting plastics (grp) pipes-determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor: ISO 14828: 2016[S]. 2016.
[27]Glass-reinforced thermosetting plastics (GRP) pipes-determination of the ring creep properties under wet or dry conditions: ISO 10468: 2018[S]. 2018.
[28]Plastics piping systems-glass-reinforced thermosetting plastics (GRP) pipes and fittings-methods for regression analysis and their use: ISO 10928: 2016[S]. 2016.
[29]Farshad M. Determination of the long-term hydrostatic strength of multilayer pipes[J]. Polymer Testing, 2005, 24(8): 1041-1048.
[30]玻璃纤维增强热固性树脂管及管件长期静水压试验方法: GB/T 32491—2016[S]. 2016.
[31]玻璃纤维增强热固性塑料(GRP)管湿态环境下长期极限弯曲应变和长期极限相对环变形的测定: GB/T 32378—2015[S]. 2015.
[32]Guedes R M, Sá A, Faria H. On the prediction of long-term creep-failure of GRP pipes in aqueous environment[J]. Polymer Composites, 2010, 31(6): 1047-1055.
[33]Zouhar M, Pavel H, Luboš N, et al. Damage of multilayer polymer materials under creep loading[J]. Key Engineering Materials, 2011, 465: 153-156.
[34]Guedes R M, Alcides S, Faria H. Influence of moisture absorption on creep of GRP composite pipes[J]. Polymer Testing, 2007, 26(5): 595-605.
[35]Hale J M, Gibson A G, Speake S D. Biaxial failure envelope and creep testing of fibre reinforced plastic pipes in high temperature aqueous environments[J]. Journal of Composite Materials, 2002, 36(3): 257-270.
[36]Farshad M, Necola A. Effect of aqueous environment on the long-term behavior of glass fiber-reinforced plastic pipes[J]. Polymer Testing, 2004, 23(2): 163-167.
[37]朱四荣, 梁娜, 李悦, 等. 玻璃钢管的长期刚度测量及预测[J]. 复合材料学报, 2016, 33(11): 2492-2499.
[38]宋奇叵, 李琛彧. 《埋地玻璃纤维增强塑料夹砂管管道结构设计规程》相关问题及等效设计概念[J]. 特种结构, 2009(5): 61-65.
[39]谢中伟. 玻璃钢管静水压试验机的研制[D]. 哈尔滨: 哈尔滨工业大学, 2009.
[40]凌伟, 翁云烜. 无压埋地塑料管材蠕变性能的特性表征、技术要求与评定方法[J]. 中国塑料, 2003(5): 62-64.