STUDY ON INTERFACE OF HIGH PERFORMANCE CARBON FIBER COMPOSITES

Abstract

Abstract: The surface configuration and interface property of MT300-3K and JHT300-3K were studied,which compared with Toray T300-3K. The SEM results showed that these three kinds of carbon-fiber had the same surface configuration. The testing by single-fiber methods showed that MT300-3K and Toray T300-3K had the similar interface shear strength,which was a little higher than JHT300-3K. Laminates results indicated that MT300-3K, JHT300-3K and Toray T300-3K matched well with 601 resin system,and had the similar interface strength.

Key words: T300-3K, carbon-fiber, composites, single-fiber method, interface

CLC Number:

TB332

LI Jian-fang, ZHANG Ya-ting, SUN Hong-jie. STUDY ON INTERFACE OF HIGH PERFORMANCE CARBON FIBER COMPOSITES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(5): 28-31.

References

[1] 耿立艳,张辰威,刘文博,鞠春华. CF /SiO2 改性树脂基复合材料界面性能研究[J]. 玻璃钢/复合材料,2012,(2) : 60-63.
[2] 彭公秋,杨进军,曹正华,谢富原. T700S /QY8911 复合材料界面匹配研究[J]. 航空材料学报,2011,31(2) : 43-48.
[3] 赖娘珍,周洁鹏,王耀先,董超亮. 芳纶纤维/AFR 树脂复合材料界面粘接性能的研究[J]. 玻璃钢/复合材料,2011,(4) : 3-8.
[4] 张慧慧,崔益华,王鑫鑫,谢博. 天然纤维增强不饱和聚酯树脂复合材料的界面研究进展[J]. 玻璃钢/复合材料,2011,(3 ) : 60-64.
[5] 刘文博,王荣国,矫维成,江龙. CF /PEEK 复合材料界面结构与性能[J]. 复合材料学报,2008,25(4) : 45-50.
[6] Sezai A,Tofail Syed A M,Serantoni Marina,Henry John,Cunnane Vincent J. Surface characterization of electron grafted random poly [carbazole-co-3-methylthiophine]copolymers on carbon fiber: XPS, AFM and Raman spectroscopy[J]. Applied Surface Science,2004, 222(1 /4) : 148-165.
[7] 张阿樱,张东兴,李地红,杨蕤. 碳纤维环氧树脂层压板疲劳性能研究进展[J]. 玻璃钢/复合材料,2010,(6) : 70-74.
[8] Andrews1 E. W.,Garnich M. R. Stresses around Fiber Ends at Free and Embedded Ply Edges[J]. AIAA,2007,2081: 1-10.
[9] Bechel,V.T and Kim,R. Y. Damage Trends in Cryogenically Cycled Carbon /Polymer Composites[J]. Composites Science and Technology, 2004,64: 1773-1784.
[10] Kwon Y. W.,R. Slaff,S. Bartlett,et al. Enhancement of Composite Scarf Joint Interface Strength through Carbon Nanotube Reinforcement[J]. Journal of Materials Science, 2008, 40: 6695-6703.
[11] 陈伟明,王成忠,周同悦,杨小平. T800 碳纤维复合材料界面吸湿性能分析[J]. 玻璃钢/复合材料,2006,(5) : 20-27.
[12] Bartos P.Analysis of pullout tests on fibers embedded in brittle matrices[J]. Journal of Materials Science, 1980, 15(12 ) : 3122-3128.
[13] Drzal L.Adhesion of graphite fibers to epoxy matrices[J]. Journal of Adhesion,1983,16(2) : 133-152.
[14] Piggott M R.Why interface testing by single-fibre methods can be misleading[J]. Composites Science and Technology,1997,57: 965-974.
[15] 谢斐娟,孙家骧译. 工程材料的失效分析[M]. 北京: 机械工业出版社,2003. 287.