一种泵喷定子导管的成型工艺研究

玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (12): 72-77.

一种泵喷定子导管的成型工艺研究

朱秀迪¹, 孙超明^1,2, 宋志钱¹, 侯鑫¹

1.北京玻钢院复合材料有限公司,北京102101;
2.特种纤维复合材料国家重点实验室,北京102101

收稿日期:2018-08-03 出版日期:2018-12-28 发布日期:2018-12-28
作者简介:朱秀迪(1987-),女,工程师,主要从事复合材料工艺方面的研究,xiuxiu051@outlook.com。

STUDY ON A MOLDING PROCESS OF THE PUMP INJECTION STATOR PIPE

ZHU Xiu-di¹, SUN Chao-ming^{1, 2}, SONG Zhi-qian¹, HOU xin¹

1.Beijing Composite Materials Co., Ltd., Beijing 102101, China;
2.State Key Laboratory of Advanced Fiber Composites, Beijing 102101, China

Received:2018-08-03 Online:2018-12-28 Published:2018-12-28

摘要/Abstract

摘要： 泵喷推进器是一种航行器喷水推进装置,主要由泵喷定子导管和转子两部分构成,大幅度改善了空泡性能,还可降低导管本身的噪声。文章介绍了其中一种泵喷定子导管的研制技术。作为泵喷推进器的一个主要部件,泵喷定子导管主要由定子和导管两部分组成,其中定子又分为定子毂和定子叶片两部分。根据泵喷定子导管的结构特点和技术要求,通过对定子毂、定子叶片、导管的连接结构设计、导管蒙皮的结构设计等进行成型工艺方案设计及制造研究,成功研制了复合材料泵喷定子导管产品,并通过承载、型值、水压等测试,有力地推动了复合材料泵喷推进器在我国水下航行器上的应用,具有显著的社会效益。

关键词: 泵喷定子导管, 承载测试, 型值测试, 水压测试

Abstract: Pump-jet propeller is a kind of water-jet propulsion device of aircraft. It is mainly composed of pump-jet stator duct and rotor. It can greatly improve the cavitation performance and reduce the noise of itself. This paper introduces the development technology of a pump-jet stator duct. As a main component of the pump-jet propeller, the pump-jet stator duct is mainly composed of two parts: the stator and the duct, in which the stator is divided into two parts: the hub stator and the stator blade. According to the structural characteristics and technical requirements of pump-jet stator conduit, through the design of connection structure of stator hub, stator blade, conduit, design of tube skin structure and so on, the design and manufacture of molding technology scheme are studied in this paper. The product of composite pump-jet stator duct has been developed successfully, and the application of composite pump-jet propeller in underwater vehicle in China has been promoted by testing load, model value and hydraulic pressure, which has remarkable social benefit value.

Key words: pump injection stator conduit, bearing test, type value test, water pressure test

中图分类号:

TB332

朱秀迪, 孙超明, 宋志钱, 侯鑫. 一种泵喷定子导管的成型工艺研究[J]. 玻璃钢/复合材料, 2018, 0(12): 72-77.

ZHU Xiu-di, SUN Chao-ming, SONG Zhi-qian, HOU xin. STUDY ON A MOLDING PROCESS OF THE PUMP INJECTION STATOR PIPE[J]. Fiber Reinforced Plastics/Composites, 2018, 0(12): 72-77.

参考文献

[1]郭维, 杨清轩, 苏强. 国外弹道导弹核潜艇发展趋势研究[J]. 舰船科学技术, 2015, 37(7): 233-237.
[2]陈锋, 齐国英, 赖鸣, 等. 国外新型核潜艇技术特征研究[J]. 舰船科学技术, 2014, 36(9): 153-157.
[3]倪永燕, 刘为民. 泵喷水推进器研究进展[J]. 船海工程, 2013, 42(5): 1-5.
[4]周梅梅. 船舶推进器的研究[J]. 天津职业院校联合学报,2017,19(2): 90-94.
[5]韩旗. 吊舱推进器的发展趋势及关键技术分析[J]. 机电设备, 2016(3): 45-50.
[6]赵威, 杨晨俊. 船舶螺旋桨螺距及拱度的优化设计研究[J]. 中国造船, 2010, 51(3): 1-8.
[7]刘敏, 张宁, 李新汶, 等. 泵喷推进器导管对噪声传播特性的影响[J]. 舰船科学技术, 2011, 33(8): 20-23.
[8]Suryanarayana C, Satyanarayana B, Ramji K, et al. Performance evaluation of an underwater body and pump-jet by model testing in cavitation tunnel[J]. International Journal of Naval Architecture and Ocean Engineering, 2010, 2(2): 57-67.
[9]付建, 宋振海, 王永生, 等. 泵喷推进器水动力噪声的数值预报[J]. 船舶力学, 2016, 20(5): 613-619.
[10]胡雷俊, 曹琳琳, 车邦祥, 等. 基于高空化性能的对转泵喷推进器设计[J]. 工程热物理学报, 2017, 38(9): 1877-1881.
[11]靳栓宝, 祝昊, 王东, 等. 水下航行体泵喷推进器总体选型与设计[J]. 哈尔滨工程大学学报, 2018, 39(5): 851-856.
[12]Lu L, Pan G, Sahoo P K. CFD prediction and simulation of a pumpjet propulsor[J]. International Journal of Naval Architecture & Ocean Engineering, 2016, 8(1): 110-116.
[13]付建, 宋振海, 王永生, 等. 泵喷推进器水动力噪声的数值预报[J]. 船舶力学, 2016, 20(5): 613-619.
[14]石丽建, 汤方平, 谢荣盛, 等. 基于CFD计算的轴流泵改型设计和效果[J]. 农业工程学报, 2015, 31(4): 97-102.
[15]施瑶, 潘光, 王鹏, 等. 泵喷推进器空化特性数值分析[J]. 上海交通大学学报, 2014, 48(8): 1059-1064.